Blanco drink.soda EVOL-S Pro 526255 Assembly Instructions Manual page 26

EN
CO
2
Only the original BLANCO CO cylinders with a
2
max. standard volume of 425 g may be used in
the unit.
When fastening the CO cylinder, make sure
2
that it is screwed in tightly. Once you have
screwed in a new CO cylinder, turn it another
2
quarter as far as it will go to ensure secure
fastening.
CO cylinders are pressurised. Protect them
2
from direct sunlight, sources of heat and over-
heating.
Mains connection
The connection cable with EU plug is designed
for connection to a CEE 7 type F safety socket
outlet with residual-current circuit breaker
(residual-current device with 30 mA release
current).
The socket outlet must be freely accessible
after the system is installed.
230 V
10-16 A
Do not use domestic multiple socket outlets. If
with residual-current
circuit breaker
necessary, contact BLANCO customer service.
It is not permitted to use a direct (permanently
installed) electrical line to connect to the
power network.
The cable must be laid in such a way that it
cannot be damaged. Damaged cables must
be replaced.
Important: Magnetic fi eld!
The spray head holder contains a strong
magnet. Patients with a pacemaker should
keep a distance of at least 15 cm.
26