Advertisement
Cleaning & maintenance - Waste Removal
Remove dust cup via dust cup release button.
*For optimal performance always empty dust cup container after each use.*
Cleaning & maintenance - Washing the dust cup & filter
Remove filter from
dust cup.
Troubleshooting
The vacuum could not be turned on.
Ensure device is charged.
The vacuum is weaker.
1. Ensure filter is cleaned and there is no obstructions present near the
intake & throughout the vacuum suction pipe.
2. Ensure device is charged.
Wash dust cup with a soft
sponge/ brush and warm water.
*Air dry dust cup filter before reinstallation.*
Aiwa Electronics Int'l Co., Ltd. Explore more at www.int-aiwa.com © All Rights Reserved
Release waste via waste release
mechanism as shown.
Wash filter with
warm water.
Advertisement
