Advertisement
Device Walkthrough - Power ON / OFF
Press
to start up.
* LED lights will illuminate upon
device being turned on. *
Device Walkthrough - Suction mode variation
Press to variate between 2 available suction modes
(High speed / Quiet Mode).
Device Walkthrough - Battery & Charging
Connect charging cable to any power source and the AR1201 as shown.
(Connect directly/ via wall mount)
Charging time - Approx. 4 - 5 Hours
Run time - Approx. 40 Minutes
*Charging indicator light lights up red (0%-50% Charge)*
*Charging indicator light lights up orange (50%-90% Charge)*
*Charging indicator light lights up green (90%-100%% Charge)*
*Battery discharge - Low discharge (Green), High discharge (Orange)*
Aiwa Electronics Int'l Co., Ltd. Explore more at www.int-aiwa.com © All Rights Reserved
Advertisement
