Using A Memory Card (Ctk-5000 Only; Inserting And Removing An Sd Memory Card; Formatting An Sd Memory Card - Casio CTK-4000 User Manual

Using a Memory Card (CTK-5000 Only)

Inserting and Removing an SD
Memory Card
• Note that the SD memory card must be oriented
correctly when you insert it into the SD memory card
slot. Trying to force the memory card into the slot can
damage the card and the slot.
1.
With the top of the SD memory card facing
upwards (so you can see it), carefully insert the
card into the keyboard's SD memory card slot
dt
( ) until stops with a click.
2.
Press the SD memory card into the card slot
and then release it.
This will cause the card to disengage and eject partially.
Pull the card out of the slot.
E-60
Front

Formatting an SD Memory Card

• Before using an SD Memory card, first be sure to
format it on the Digital Keyboard.
• Before performing the procedure below, check to make
sure that the SD memory card does not contain any
data you might need.
• The SD memory card format performed by the Digital
Keyboard is a "quick format". If you want to completely
delete all of the data on the card, format it on your
computer or using some other device.
1.
Insert the SD memory card you want to format
into the Digital Keyboard's card slot.
• Make sure that the write-protect switch of the SD
memory card is not in the write-protect position.
2.
cs ct
Press and at the same time.
F o r m a t
3.
br
Press the (10-key) [7] (ENTER) key.
This will display the format confirmation screen.
S u r e ?
4.
br
Press the (10-key) [+] (YES) key.
The message "Pls wait" will appear on the display. Do not
perform any operation while this message is displayed.
"Complete" appears on the display after formatting is
complete.
• To cancel the format operation, press [–] (NO) or [9]
(EXIT) in place of [+] (YES).
P l s w a i t
C o m l e t e
p