Connecting To A Voice Assistant - Vizio M-Series Elevate 5.1.2 User Manual

Function LED Behavior
Surround Level
Two center LEDs indicate
surround level 0.
Surr Lvl
Two center LEDs
Surround Balance
indicate surround
balance is centered.
Surr Bal
Height Level
Two center LEDs
indicate height level 0.
Height Lvl
Info
Info
Auto VA
Auto VA
Eco Power Mode
Eco Power Mode
Eco Pwr
Eco Power Mode
LEVEL > Surr Lvl > Use the Next/Previous buttons to increase/decrease the surround
sound level. The LED indicators will move to the top with increasing level and to the bottom
with decreasing level.
Note: Surround must be ON to adjust the surround level.
LEVEL > Surr Bal > Use the Next/Previous buttons to increase/decrease the surround
balance level on each side. The LED indicators will move to the top with balance levels to the
right and down with balance levels to the left.
LEVEL > HeightLvl > Use the Next/Previous buttons to increase/decrease the level of the
height speakers. The LED indicators will move to the top with increasing height level. Use
this adjustment to accommodate various ceiling heights and seating distances.
SETUP > Info > OK to have the sound bar verbally announce the current sound bar input
—
and audio type being played with corresponding LED indicators.
SETUP > Auto VA > Use the Next/Previous buttons to toggle between connecting
the sound bar to a Voice Assistant through Bluetooth (BT), AUX, Both, or OFF. Refer to
Connecting to a Voice Assistant on page 23 for more information.
Note: Default setting is Both.
SETUP > EcoPwr > Use the Next/Previous buttons to enable/disable Eco Power Mode.
When ON, the sound bar will go into standby after a period of inactivity. The sound bar will
On
automatically turn off when no audio signal is detected. Off disables this feature.
Note: If you would like to cast content without the need to manually turn on the sound bar,
Off
set this mode to Off. Default setting is Off.
Mode & Level Settings
Description