Adding Key Manager Configuration Details - Hewlett Packard Enterprise 200 Series User Manual

Adding key manager configuration details

Adding key manager configuration details
Prerequisites Prerequisites
Configure iLO Settings privilege
A license that supports this feature is installed. For information about the available license types and the features they support, see
the licensing documentation at the following website: https://www.hpe.com/support/ilo-docs
iLO is not configured to use the CNSA security state.
At least one key manager server is configured.
Procedure Procedure
1. Click Administration in the navigation tree, and then click the Key Manager tab.
2. Click in the Key Manager Configuration section.
The Edit Key Manager Configuration Settings page opens.
3. Enter the following information in the iLO Account on Key Manager section:
Account Group
(Optional) Key Manager Local CA Certificate Name
The Account Name value is read-only.
4. Enter the following information in the Key Manager Administrator Account section:
Login Name
Password
5. Click OK.
iLO sends an information request to the key manager server.
If the ilo-<iLO MAC address> account name does not exist:
The user account you entered in the Key Manager Administrator Account section creates the account name and associates
it with the key manager local user and its generated password.
The account name is added to the account group you entered in step 3.
If the ilo-<iLO MAC address> account name exists:
The user account you entered in the Key Manager Administrator Account section associates the account name with the key
manager local user, and a new password is generated.
If the user account you entered in the Key Manager Administrator Account section is not a member of the account group
associated with the ilo-<iLO MAC address> account, it is added to the account group.
If the ilo-<iLO MAC address> is already a member of a key manager local group, the group you entered in step 3 is ignored.
The existing group assignment on the key manager is used, and it is displayed in the iLO web interface. If a new group
assignment is needed, you must update the key manager before updating the iLO settings.
If you entered the Key Manager Local CA Certificate Name in step 3, certificate information is listed in the Imported Certificate
Details section of the Key Manager page.
https://www.hpe.com/support/ilo-docs.
Adding key manager configuration details 43