Installing And Replacing Batteries - HOGERT HT4M322 User Manual

Battery indicator
Dostance measurment
Laser on indicator
Measuring datum indicator
Pythagorean indicator
Area/volume indicator

INSTALLING AND REPLACING BATTERIES

Open the battery cover on the back of the device, insert the batteries according to the polarity
and close the battery cover.
Use two 1.5 V AAA Alkaline batteries (acrylic batteries only nickel-metal hydride AAA 1.2 V).
START-UP AND MENU SETTINGS
• Turning the instrument on and off
Briefly press the button
measurement mode.
Long push of button
minutes, the device will automatically switch off.
• Setting up measurement unit
Press the key , to select or convert units of measurement.
Units of length - m (metre), ft (foot), in (inch); unit of area - m² (square metres), ft² (square feet), in² (square
inches). Units of volume are m
• Setting a reference point
Press briefly the key
The device has two reference points:
Top edge bottom edge
By default, when the rangefinder is activated, the bottom edge is the reference point for
all measurements taken.
• Switching the backlight on and off
Press long the key
will automatically switch off after 60 seconds of inactivity.
• Delete/cancel function
Briefly pressing the button
step and erases the measurement results).
Adres producenta/ Adresse des Herstellers/ Manufacturer's Address/ Адрес производителя
GTV Poland Sp. z o.o. Sp. k., ul. Przejazdowa 21, 05-800 Pruszków
indicator
for approximately 0.5 seconds, the instrument will be switched on and enter
will shut down the device～ If no operation is performed on the device for about 2
(cubic metres), ft
3
, to select a reference point, relative to which measurements will be taken.
, to turn the display backlight on/off When the backlight is on, the screen backlight
is a delete function (cancels the last command to return to the previous
(cubic feet), in (cubic inch).
3 3
Store query indicators
Data storage indicator
Signal strength indicator
Auxilary display area
Main display area
9