Front Panel Controls - Teleflex ConchaTherm Neptune User Manual

a
h
b
g
Figure 4: CONCHATHERM NEPTUNE Front Panel Controls

Front Panel Controls

a. Power ON/OFF - The
unit ON. Press and hold to turn unit OFF.
b. Mode Selector - This key selects the operating mode (Invasive or Non-Invasive).
c. Temperature and Pause Time Control - The Increase
the user to adjust the proximal patient airway temperature and pause time settings.
d. Temperature Gradient - Sun
temperature gradient between the column and the patient end of the heated-wire circuit.
e. Gradient Display - Blue LED between the Sun and Raindrop indicates the actual
temperature gradient setting. The example below shows a setting of one degree towards
the raindrop. This setting would increase humidity in the circuit.
Example:
f. Accept Button
displayed parameters and store settings into memory.
g. Pause Button
minutes.
h. Alarm Mute Button
i. Column Button - When pressed, the LED displays the temperature of the gas at the outlet
of the column. The column temperature will remain displayed as long as the key is pressed.
i
button controls power to the humidifier. Press and hold to turn
and Raindrop
- Used to check settings, access adjustable settings and accept the
- Used to enter the Pause Mode for a user adjustable period of 5-60
- Used to silence a Cautionary Alarm for two minutes.
and Decrease
- These keys increase or decrease the
c
d
e
f
Buttons allow
13