Samsung A920 User Manual page 32

The SAR value of a phone is the result of an extensive
testing, measuring and calculation process. It does not
represent how much RF the phone emits. All phone
models are tested at their highest value in strict
laboratory settings. But when in operation, the SAR of
a phone can be substantially less than the level
reported to the FCC. This is because of a variety of
factors including its proximity to a base station
antenna, phone design and other factors. What is
important to remember is that each phone meets
strict federal guidelines. Variations in SARs do not
represent a variation in safety.
All phones must meet the federal standard, which
incorporates a substantial margin of safety. As stated
above, variations in SAR values between different
model phones do not mean variations in safety. SAR
values at or below the federal standard of 1.6 W/kg
are considered safe for use by the public.
The highest SAR values for this model phone as
reported to the FCC are Head:0.600 W/Kg(CDMA),
1.280 (PCS), Body- worn:0.162 W/Kg(CDMA), 0.789
W/Kg (PCS). Body-worn operations are restricted to
Samsung-supplied, approved or none Samsung
designated accessories that have no metal and must
provide at least 1.8cm separation between the device,
including its antenna whether extended or retracted,
and the user's body. None compliance to the above
restrictions may violate FCC RF exposure guidelines.
FCC Radiofrequency Emission
This phone meets the FCC Radiofrequency Emission
Guidelines.
FCC ID number: A3LSPHA920. More information on
the phone's SAR can be found from the following FCC
Website: http://www.fcc.gov/oet/fccid.
28