FLAJZAR FISHTRON RX MULTI Instructions For Operation And Use

Remote listening receiver

Download this manual

THE FISHTRON RX MULTI Remote Listening Receiver

Thank you for purchasing the FISHTRON RX MULTI remote listening receiver.

The 4-channel receiver receives the signal from

your FISHTRON Q9-RGB TX, FISHTRON NEON

TX3 and FISHTRON CatFish TX3 bite alarms. It

indicates fishing line unwinding by both sound

and LEDs. It transmits information about a bite as

well as the bite alarm's LED colour setting. Now

you don't have to change the position on the

receiver when learning a new detector or

changing the colour, but the receiver displays the

Description of the FISHTRON RX MULTI

Turning the receiver on

The receiver is turned on and off with the switch located at the top. All of the LEDs light up for a while, a

sound signal is heard (double beep) and a vibrating transducer switches on briefly after turning on.

If the battery is very low and no longer able to power the receiver, the receiver is completely out of service

or the BAT LED indicating this status may flash quickly when turned on.

Receiver volume control

You can control the volume of sound signalling by pressing the PLUS and MINUS buttons in five steps

from mute to the loudest sound.

Lamp function

The LED lamp is switched on by briefly pressing the button with the bulb symbol. Press again briefly to

switch off the LED. If you forget to switch the lamp off, it will switch off automatically after 3 minutes.

The FISHTRON RX MULTI receiver are now able to control external FISHTRON WRL1 and FISHTRON

WRL2 wireless lamps.

Instructions for operation and use (last updated on 1 Nov 2017)

We hope you'll be satisfied.

colour of the given position that's saved in the bite

alarm.

In addition, the receiver is also designed for alarm

signalling from up to three wireless external

alarms. The alarm sensor easily protects your car,

motorcycle or fishing spot. In addition, the

FISHTRON RX MULTI receiver is equipped with

an integrated LED lamp. You can control the

volume of sound signalling and activate or

deactivate vibrations for the receiver.

Page 1 The LED lamp is switched on by briefly pressing the button with the bulb symbol. Press again briefly to switch off the LED. If you forget to switch the lamp off, it will switch off automatically after 3 minutes. The FISHTRON RX MULTI receiver are now able to control external FISHTRON WRL1 and FISHTRON WRL2 wireless lamps.
Page 2 Even though the FISHTRON Q9-RGB TX bite alarm is designed with a long battery life, we strongly recommend removing the batteries when the season ends and using new ones for the following season. The same applies to other FLAJZAR fishing products. The FISHTRON RX MULTI specifications •...
Page 3 The device complies with EU directives and has a Declaration of Conformity. Post-Warranty Service The post-warranty service is performed exclusively by the Czech manufacturer – FLAJZAR, s.r.o. We will apply our maximum effort to help you solve every problem in the shortest possible time.