Download Print this page
FLAJZAR FISHTRON RX MINI Instructions For Operation And Use

FLAJZAR FISHTRON RX MINI Instructions For Operation And Use

Remote listening receiver

Advertisement

Quick Links

The FISHTRON RX MINI Remote Listening Receiver
Thank you for purchasing the FISHTRON RX MINI remote listening receiver.
The new miniature remote listening receiver,
capable of receiving up to nine devices; a bite is
signalled acoustically and optically on a LED
display. It not only works with the FISHTRON NEON
TX3, FISHTRON Q9-RGB TX and FISHTRON
Description of the FISHTRON RX MINI
The nine-channel FISHTRON RX MINI receiver is designed for a wireless fish bite or alarm evaluation. All nine
channels can be used to save either bite alarms or alarms. The kit's range, i.e. a transmitter from the receiver,
is up to several hundred metres in free space. The receiver can be paired with a FLAJZAR bite alarms, such
as FISHTRON NEON TX3, FISHTRON Q9-RGB TX or FISHTRON CatFish TX3 or FISHTRON ALF3 alarm
sensor.
The receiver is switched on with a sliding switch which is located on the left side. After turning it on, the LED flashes
briefly and a short tone is heard.
The PLUS and MINUS buttons are located on the front side and are used for sound signalling volume control
in normal mode. They also activate the learn mode.
The FISHTRON RX MINI functions during a bite
• A compatible bite alarm signals the bite by sending encoded information to the receiver. The receiver first
verifies whether the bite alarms which is transmitting is stored in its memory – this will prevent the other
fisherman from interfering with the kit.
• If the signal from the detector is evaluated as valid, the sound signalling the bite will be heard on the
receiver (the pitch of the tone corresponds to the pitch of the tone set on the bite alarm) and the
corresponding number of the channel which the bite is on or which sent the signal that lights up on the
LED display.
• The channel number is still displayed 20 seconds after the bite on the LED display, then the red LED
flashes for 60 seconds at the top of the receiver (memory) and the number of the channel with the bite
comes on after briefly pressing any button.
Instructions for operation and use (last updated on 13 Oct 2017)
We hope you'll be satisfied.
CatFish TX3 bite alarms, but also detects an alarm
from the FISHTRON ALF3 wireless sensors and
can connect other FLAJZAR accessories. Simple,
miniature, easily carried and with a long battery life.

Advertisement

loading

Summary of Contents for FLAJZAR FISHTRON RX MINI

  • Page 1 The kit’s range, i.e. a transmitter from the receiver, is up to several hundred metres in free space. The receiver can be paired with a FLAJZAR bite alarms, such as FISHTRON NEON TX3, FISHTRON Q9-RGB TX or FISHTRON CatFish TX3 or FISHTRON ALF3 alarm sensor.
  • Page 2 Learning mode As with other FLAJZAR receivers, the learning mode is started by pressing the PLUS and MINUS buttons simultaneously for approximately 3 seconds to store or delete compatible bite alarms. After entering the learning mode, the C (Channel) symbol and the channel number appear on the LED display. You can switch between the channels by using the PLUS and MINUS buttons.
  • Page 3 Quick email contact in case of problems: obchod@flajzar.cz. Recycling Information for the user’s disposal of electrical and electronic equipment. The symbol on the product, its packaging or in the accompanying documentation means that the used electrical or electronic products must not be disposed of together with municipal waste.