Sony GeoSnap Airpeak S1 Integration Manual page 6
Hide thumbs
Also See for GeoSnap Airpeak S1:
- Specifications (2 pages) ,
- Help manual (123 pages) ,
- Startup manual (56 pages)
Advertisement
10. Install the provided power cable/splitter as shown.
11. Install a zip tie as shown and plug in the red JST power connector into its mating
connector on the side of the GeoSnap mount plate. Trim off the end of the zip tie.
Need help? Email
support@fieldofviewllc.com
or call 701-203-3757 x3
6
Advertisement
