Cleaning And Maintenance - Faber FBG Blendy 125 GRN Instruction Manual

CLEANING AND MAINTENANCE

Make sure to disconnect appliance from power supply before cleaning
For blender
The Auto Clean function can clean the blender easily and rapidly in complete safety.
1. Pour a little warm soapy water into the Jar and turn the Speed Selector to "1"
position and press down the Pulse button without releasing it for a few seconds.
2. Dismantle all detachable parts
under running water, then detach the blade assembly from the jar assembly, take
the blade assembly out, finally remove the jar base seal ring (see fig.6). In addition,
detach the measure cup from the jar cover. Rinse the jar, blade, jar base, jar cover
and measuring cup under running water.
3. Wipe the outer surface of motor unit and with a damp cloth.
NOTE: Do not use abrasive cleanser and never immerse motor unit in water for
cleaning
4. Dry all parts and then assemble them. The method of assembling blender
attachment just is in opposite of its detaching sequence.
NOTE: If any problem has been encountered during using, never disassemble
the Motor Unit by yourself. There are no user serviceable parts inside. Only
contact the authorized service facility for examination and repair.
Dissemble the Jar from the motor unit and rinse it
.
6