Before The First Use; Blender Operation - Faber FBG Blendy 125 GRN Instruction Manual

BEFORE THE FIRST USE

Check that all parts are complete and not damaged. Choose the appropriate
attachment to perform your desired task. The blender attachment is suitable for
blending fruits or vegetables or crushing ice, while the grinder attachment for
grinding coffee beans. Clean the attachment according to the section "CLEANING
AND MAINTENANCE".
WARNING: The blade is sharp, handle with great care and ensure that unplug the
appliance from outlet before assembling and removing parts.

BLENDER OPERATION

1. Lay the motor unit on the flat horizontal surface and make sure it is unplugged.
NOTE: There is a safety interlock device at the bottom of jar, if the jar is not
assembled in place, the blender will not operate.
2. Open the jar cover by turning anticlockwise and place it on the surface. Peel or
core the fruits or vegetables and then cut it into small pieces, then put them into the
jar. Usually certain amount of purified water has to be added to facilitate the
smooth running of appliance. The amount of mixture should not exceed the max
level as indicated on the jar, nor sit lower the min level. The best proportion of the
fruits or vegetables and water is 2:3.
NOTE: The blender is not applicable for beating egg white, mashing potatoes,
mixing dough, extracting juice from fruit and vegetable.
3. Replace jar cover on the jar and turn it clockwise.
NOTE: There is a safety interlock device at the side of jar cover, if the jar cover
is not assembled in place, the blender will not operate.
4. You may add ingredients into the jar through the center opening of jar cover during
operation, then replace measuring cup if necessary. Let the tabs of measuring cup
aligns with the grooves of jar cover, put down and turn the measuring cup by
clockwise until it in place.
5. Ensure the Speed Selector to " 0" Position, then plug into power outlet and set
Speed Selector to your desired setting. You can press down the Pulse button
without releasing it if want to accelerate the process of blending. The detailed
information is shown in below Fig. 1
3