Adjusting the image during recording
Symptom
•
•
Focus does not
adjust automatically.
•
•
The image appears
•
too bright or flickering,
or changes in color.
Playback on your camcorder
Symptom
Pressing the
•
playback (Play/
•
Pause) button did
not start playing.
•
The Skip or Search
•
function does not
work properly.
Playback is
interrupted
•
unexpectedly.
You cannot hear
sound when playing
•
a Time Lapse
recording.
Photos stored on a
storage media are
•
not displayed in the
actual size.
Playback on other devices (TV, etc.)
Symptom
•
You cannot view
the image or hear
the sound on the
•
connected device.
Set "Focus" to "Auto." page 57
The recording conditions are not suitable for auto focus.
Adjust the focus manually. page 58
The lens is dusty on the surface. Clear the lens and check the focus.
Recording is being made in a dark place. Increase the brightness in the
place.
This occurs when recording images under a fluorescent lamp, sodium
lamp, or mercury lamp. Cancel "iSCENE" to minimise these phenomena.
page 46
Press the MODE button to set Video Play mode.
Image files recorded on another camcorder may not play on your
camcorder.
Check out a memory card compatibility. page 32
If the temperature inside the camcorder is too high, it cannot function
properly.
Turn the camcorder off, wait for a few moments, and turn it on again.
Check if the AC adaptor or battery pack is properly connected and stable.
The Time Lapse REC function does not support sound. page 64
Photos recorded on other devices may not appear at actual size.
This is not an error.
Connect the audio line of the Audio/Video cable jack to your camcorder
and the connected device (TV, DVD recorder, etc). (Red color- right, White
color- left)
The Audio/Video cable jack is not connected properly. Make sure that the
Audio/Video cable jack is connected to the proper jack. page 93
Explanation/Solution
Explanation/Solution
Explanation/Solution
111