Advertisement
Care, Cleaning
& Storage
Before cleaning, ensure the power is
switched off and then remove the power plug
from the power outlet.
Allow your sandwich press to mostly cool
before cleaning however, the sandwich press is
easier to clean when still slightly warm.
Always clean your sandwich press after each
use to prevent a build-up of baked-on foods.
Wipe cooking plates with a soft, damp cloth to
remove food residue.
WARNING
Do not immerse any part of the Breville
Sandwich press or the power cord in water or
any other liquid.
PFOA-FREE NON-STICK
COATING
Cooking on a non-stick surface minimises the
need for oil as food does not stick and cleaning
is easier. Any discolouration that may occur
will only detract from the appearance of the
sandwich press and will not affect the cooking
performance. When cleaning the non-stick
coating, do not use metal (or other abrasive)
scourers. Wash with warm soapy water and dry
thoroughly. Remove stubborn residue using a
damp cloth.
SEASON THE PLATES
Season the plates occasionally to prevent
sticking and to make cleaning easier. To
season, brush the cooking plates with a little
vegetable oil and rub off the excess with
absorbent paper. Do this after preheating
the unit.
NOTE
The cooking plates and hinges are coated
with a non-stick surface; do not use abrasive
cleansers or scourers.
STORAGE
To store your sandwich press:
1. Ensure the power is off and then unplug
power cord from the power outlet.
2. Allow the sandwich press to cool and clean
as per instructions. Close the lid and slide
the locking clip from unlocked to locked so
the lid will not open.
3. Wrap the power cord in the storage area on
the base of the sandwich press.
4. Store on a flat, dry level surface. Do not
place anything on top of the sandwich press
or the cooking plates. The sandwich press
can be stored on its side for space saving.
WARNING
Allow the unit to cool down before attempting
to move the unit.
9
Advertisement
