Advertisement
Safety instructions
WARNING
Risk of injury due to live parts!
When the housing is open, contact protection is not provided and EMC protection is limited.
•
Before opening the housing, switch off the power supply.
WARNING
Risk of poisoning
Risk of poisoning due to escaping poisonous or suffocating sample gas.
•
if poisonous or oxygen-supplanting sample gases are conveyed using the device, the gas paths need to be purged with inert
gas or air before the gas-bearing components are opened.
•
Close open process connections so that they are gas-tight to prevent the escape of sample gas.
•
When working on the device, use suited personal protection equipment (PPE) in accordance with the risk assessment.
•
Comply with operator regulations regarding occupational safety!
CAUTION
Risk of injury caused by aggressive media
The media and condensates in the device can be aggressive and cause corrosion.
•
When working on the device, use suited personal protection equipment (PPE), such as safety goggles, protective gloves or
protective clothing.
CAUTION
Risk of burns caused by hot components in the device
The surface temperature of components in the device can up-scale 60 °C (140 °F)!
•
Before opening the housing, switch off the power supply.
•
Observe a cooling time of > 20 min before working on the device.
CAUTION
Risk of crushing caused by rotating components!
Risk of crushing caused by the automatically operating hose pump.
•
Switch off the power supply before starting work on the hose pump.
2/3
Advertisement
