Advertisement
INSTRUCTIONS:
1.
Carefully remove the aquarium and its components from the box and packing materials.
Please check for damages, should there be damages, please kindly return to your retailer
immediately.
2.
Check for components inside package:
a)
Aquarium tank
b)
LED light on top cover
c)
Stone stacking ornament
d)
water pump with filter cartridge
e)
decoration gravels
f)
USB adaptor and 2-way USB port
g)
colour lens
3.
POSITIONING your tank, please
use the following guidelines when
positioning your tank:
- Choose a strong support surface
for the tank; remember, when the
tank is full of water, it can be heavy!
- The tank should put on a flat
surface without inclination.
- Try to avoid a location with direct sunlight as this can encourage algae growth & cause
"green water" problems.
4.
DECORATE your tank with gravels & stone stacking ornament.Remember: rinse all
decorative items before putting them in the aquarium.
5.
The water pump power cord can position along the edge inside the aquarium, there're slots
at the back for cord management. (Ref. Fig. 1)
FILL the aquarium with water slowly to the mid frame (Ref. Fig. 2).
6.
Fig. 1
7.
Connect pump and light to the USB adaptor. (Ref. Fig. 3).
8.
Select daylight just by a touch on the top cover. (Tips:
Fishes require sufficient rest also; we suggest the day light
to be left on for max 12 hours per day). (Ref. Fig.4)
9.
Before adding your fish, please add "Chlorine Neutral" (not
included) into aquarium (check dosage on packaging). Let
the filtration run for about 2 hours before adding fish. If you
do not have Chlorine Neutral, we recommend to run the
filtration for 12 hours before adding fish.
10.
There're colour rings included. Simply clip onto the LED
light to bring out the colours of your fish. (Ref. Fig.5) Pink for gold fish & blue to look like
saltwater setup.
b
a
g
Fig. 2
Fig. 4
Fig. 5
c
d
f
e
Fig. 3
Advertisement
