Variable Speed - Ryobi HP512K Operator's Manual

9.6 v/12 v
Table of Contents

Advertisement

sWItcH
See Figure 7.
To turn the drill oN, depress the switch trigger. To turn it
oFF, release the switch trigger.

vARIABle speed

See Figure 7.
The drill has a variable speed feature in the switch. The
switch delivers higher speed and torque with increased
trigger pressure. Speed is controlled by the amount of
switch trigger depression.
sWItcH lock
See Figure 7.
The switch trigger can be locked in the oFF position. This
feature helps reduce the possibility of accidental starting when
not in use. To lock the switch trigger, place the direction of
rotation selector in the center position.
ReveRsIBle
See Figure 8.
This tool has the feature of being reversible. The direction of
rotation is controlled by a selector located above the switch
trigger. With the drill held in normal operating position, the
direction of rotation selector should be positioned to the left
of the switch for drilling. The drilling direction is reversed
when the selector is to the right of the switch. When the
selector is in center position, the switch trigger is locked.
cAutIoN:
To prevent gear damage, always allow chuck to come
to a complete stop before changing the direction of
rotation.
To stop, release switch trigger and allow the chuck to come
to a complete stop.
keyless cHuck
See Figure 9.
A keyless chuck has been provided with the drill to allow for
easy installation and removal of bits. As the name implies, you
can hand tighten or release drill bits in the chuck jaws. Grasp
and hold the collar of the chuck with one hand. Rotate the
chuck body with your other hand. The arrows on the chuck
indicate which direction to rotate the chuck body in order to
GRIP (tighten) or RELEASE (unlock) the drill bit.
WARNING:
Do not hold the chuck body with one hand and use the
power of the drill to tighten chuck jaws on drill bits. Chuck
body could slip in your hand or your hand could slip and
come in contact with rotating drill bit. This could cause
an accident resulting in serious personal injury.
opeRAtIoN
FoRWARd / ReveRSe SeleCToR
WITH CenTeR loCK PoSITIon
dRIll BIT
CHuCK
jAWS
14
SWITCH
TRIGGeR
SeleCToR
ReveRSe
FoRWARd
ReleASe
(unloCK)
GRIP
(TIGHTen)
CHuCK
CollAR
Fig. 7
Fig. 8
CHuCK
BodY
Fig. 9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hp596kHp612kHp496Hp412

Table of Contents