Part Ii Channel Message; Receive Channel; Send Channel; Note Off - Casio AP-200 Manual

Part II
Channel Message
4

Receive Channel

The channel number of the channel message received by each part is shown in the table under "1.4.2 Part Block".
The channel number of a channel message that changes the settings of a DSP coincides with the channel of the part that
is using the DSP.
5

Send Channel

Basically, the MIDI channel of the channel message sent when the Instrument is played coincides with the MIDI channel
of the part being played. Note, however, that the MIDI channel of the performance information that corresponds to the
keyboard main part is the Keyboard Channel setting value.
6

Note Off

Format
Message Format: 9nH kkH 00H (receive only)
n: MIDI Channel Number
kk:
**:
Send
Sent when something is played on the keyboard.
Receive
Received over MIDI channels that correspond to each part. A part that is turned off by the Part Enable Parameter value
explained under "20.7 Part Parameter" is not received. The velocity value is ignored.
7

Note On

Format
Message Format: 9nH kkH vvH
n: MIDI Channel Number
kk: Key Number
vv: Velocity
Send
Sent when something is played on the keyboard.
Receive
Received over MIDI channels that correspond to each part. A part that is turned off by the Part Enable Parameter value
explained under "20.7 Part Parameter" is not received.
8nH kkH **H
Key Number
Ignored
8