Lenovo ThinkVision E20-30 User Manual page 30

Installing the display driver in Windows 10
To use the Microsoft Windows 10 Plug and Play feature, do the following steps:
1. Turn off the power to the computer and all connected devices.
2. Make sure the display is properly connected.
3. Power on the display, and then power on the system unit. Let the computer start the
Windows 10 operating system.
4. Find the corresponding display driver from the Lenovo website
http://support.lenovo.com.cn/ and download it to the PC to which the display is connected
(e.g. desktop).
5. Open the Display Properties window as follows: Click the Start, Control Panel,
Hardware, and Sound icons, and then click the Display icon.
6. Click the Change the display settings tab.
7. Click the Advanced Settings icon.
8. Click the Display tab.
9. Click the Properties button.
10. Click the Driver tab.
11. Click Update Driver, and then click "Browse the computer to find the driver program".
12. Select "Pick from the list of device driver programs on the computer".
13. Click the Hard Disk button. Click the Browse button to browse and open the following
path: X:\Display Drivers\Windows 10
(where X means "the folder where the downloaded driver is located" (e.g. desktop)).
14. Select the "lenE20-30.inf" file and click the Open button. Click the OK button.
15. In the new window, select LENE20-30, and then click Next.
16. When the installation is complete, delete all downloaded files and close all windows.
17. Reboot the system. The system will automatically select the maximum refresh rate and
the corresponding color matching profile.
Note: Unlike CRTs, LCDs, increasing the refresh rate does not improve display quality.
Lenovo recommends using a 1600x 900 @ 60Hz refresh rate or 640 x 480 @ 60Hz
refresh rate.
Get further help
If you are still unable to resolve the issue, please contact Lenovo Support. For more
information on contacting the Support Center, see "Appendix A. Service and Support" on
page A-1.
Chapter 3. Reference Information 3-6