Table of Contents 3. Your Cooler 4-5. Important Safeguards 6-7. Installation Notes 7-8. First Time Use 9. Cleaning & Maintenance 10. Troubleshooting 10. Service & Spares, Specification 11. WEEE Directive, Warranty SR12030_IM.indd 2 06/12/2017 15:28...
Important Safeguards • Do not connect your appliance sure that the product is not to the electricity supply until all damaged and that all the parts packing and transit protectors and accessories are in perfect have been removed. condition. • Leave to stand upright for at •...
Page 5
Important Safeguards that is, however, also combustible. been given supervision or When transporting and installing instruction concerning use of the appliance, care should be the appliance in a safe way and taken to ensure that no parts if they understand the hazards of the refrigerating circuit are involved.
Installation Notes It is important that upon receipt you stand your appliance upright for at least 1 hour before switching on to allow the system to settle. 1. The appliance should not be tilted more than 45 degrees when you move it. Do not use force on any part such as the condenser, the door or handle.
Installation Notes 4. Ensure the supply voltage of socket is same as rating label. 5. The plug must be properly inserted to the wall socket. 6. The mains supply socket must be earthed - preferably with a switch. If it is not earthed, do NOT install this appliance there.
Page 8
How to set the temperature control Setting The Temperature Control Your cooler has been equipped with an automatic control panel lock, that will activate 20 seconds after the last time a button has been touched. Push button simultaneously for 2 seconds to unlock the control panel. You will hear a BEEP sound to after you that the control is now active.
Cleaning & Maintenance DAILY CLEANING The outside of your cooler can be cleaned using a soft cloth moistened with a mild detergent solution. Wipe dry with kitchen towel. Do not use chemical or abrasive cleaners on any part of your cooler as these could permanently damage or discolour the surfaces.
Troubleshooting 1. If the cooler does not run: Check the supply voltage is available at the socket and check that the power plug is correctly connected. Check that the power switch near the thermostat/light unit is switched ON. 2. If the cooler does not become cold enough: a.
Page 12
2 year Est. 1 931 GUARANTEE Scan this QR code We love we’re proud Find us on Facebook to hear about what we do of our quality our story SR12030_IM.indd 12 06/12/2017 15:29...
Need help?
Do you have a question about the SWC28S and is the answer not in the manual?
Questions and answers