Sounding The Metronome - Roland HP 237R Owner's Manual

Playing the Keyboard

Sounding the Metronome

You can start or stop the metronome with a single button.
In addition to adjusting the tempo and time, you can also change the sound and volume
of the metronome.
fig.5-09
Volume
Reverb
Min Max
1.
Press the Metronome [On/Off] button, and the metronome will begin
sounding.
fig.5-10.e
The Metronome [On/Off] button indicator will blink in red and green in time with the
currently selected time. It will blink in red on the downbeats, and in green on the
upbeats.
If the Metronome [Beat] slider is in the "0" position, the indicator will blink in green.
2.
When you press the Metronome [On/Off] button once again to make
the indicator go dark, the metronome will stop sounding.
fig.5-11.e
Adjusting the Metronome Volume
The metronome volume can be adjusted in 8 levels.
The metronome volume is set to "4" when the keyboard is turned on.
While holding down the Metronome [On/Off] button, also press any
Tone button.
fig.5-12.e
Decreases the volume
20
Electric Electric Harpsi-
Chorus Piano 1 Piano 2 Piano 1 Piano 2 chord
Tone
On / Off
Press
On / Off
Press
1 2 3
Electric
Piano 1 Piano 2 Piano 1
Vibra- Pipe Tempo
phone Organ Strings
40 60 80 96 120 168
On / Off
Blinks alternately
in red and green
Dark
4 5 6
Electric Harpsi- Vibra-
Piano 2 chord phone
Tone
Press
Beat
Sound On / Off
208 0 2 3 4 6
Metronome
On / Off
Increases the volume
7 8
Pipe
Organ Strings
While holding down...
Play Rec Demo Song
On / Off