Editing An Inst (Inst-Edit) - Roland OCTAPAD PAD-80 Owner's Manual

You can't select Inst Layer Type for an external pads
For external pads (p. 60), you can only use 2 sounds: Inst Head and Inst Rim. (Dual trigger pad is needed to have head and rim
sounds) Refer to the owner's manual of the pad you're using.
Internal pads External pads
Inst A Inst Head
Inst B Inst Rim

Editing an Inst (INST-EDIT)

Here's how to access the various editing parameters.
1. Choose MENU INST
Ú
The INST-EDIT screen appears.
Use [Knob 1] (SEL) to
select a parameter.
2. Hit the pad that you want to edit; it will be selected .
3. Turn [Knob 1] (SEL) to select a parameter .
4. Turn [Knob 3] (A) or [Knob 2] (B) to edit the value .
• [Knob 2] (B) edits the Inst B (Rim) value.
• [Knob 3] (A) edits the Inst A (Head) value.
Parameter Value
Tuning
-2400–+2400
Muffling 0–50
Soft Attack
0–50
Tone Color L50–H50
Pitch Sweep -100–+100
Volume
0–100
Pan L15–CTR–R15
Reverse OFF, ON
EDIT (p . 16) .
Ú
Explanation
Negative ("-") settings lower the pitch, and positive ("+") settings raise the pitch. Turning the knob will change
the value in steps of 10.
Increasing this value will decrease the resonance and decay of the sound.
Adjusts the sharpness of the sound's attack. Higher settings will produce a softer attack.
Adjusts the brightness of the sound. Higher settings will produce a brighter sound.
Positive ("+") settings make the pitch sweep from high to low. Negative ("-") settings make the pitch sweep from
low to high.
Specifies the volume.
Specifies the pan setting. CTR is center.
If this is ON, the pad's sound will play backward.
* Some Insts will NOT play in reverse .
Head shot
Inst Head
Indicates the pad you're editing; hit a pad to change this.
[Knob 2] (B) edits the Inst B (Rim) value.
[Knob 3] (A) edits the Inst A (Head) value.
Press [Button 3] (ALL) to copy the current value to all pads.
Rim shot
Inst Rim
31