Advertisement
INSTALLATION
1)
Put the handset holder [ 4 ] onto the lower pole [ 5 ]
2) Connect the upper pole [ 1 ] and the lower pole [ 5 ] making sure that the end of pole [ 1 ] goes through the
'O' rings inside the connector [ 3 ] for seal
3) Mark out the position on the wall
4) Prepare the pipework and fit the valve fixing plate [ 10 ] on the wall
5) Connect the divertor [ 7 ] to the valve and attach riser pole to the divertor [ 7 ]
6) Fix the valve and connect the inlets, making sure the hot connection is to the left and the cold to the right
7) Valve MUST be open when turning the mains water back on to ensure no debris is caught in the cartridges.
Finally, check connections for watertightness.
Guarantee
For full details of our guarantee please refer to our website. Our products are backed by a 10 year guarantee, this is
only valid to customers who complete and submit the online Niagara® Guarantee Registration Form within 30 days
of installation. Please note that products with finishes other than Chrome are guaranteed for 2 years only, these
products must also be registered online to activate the 2 Year Guarantee. To register and activate your guarantee
please visit www.niagarabathrooms.co.uk
Aftercare
Care MUST be taken when cleaning our products to avoid damaging the fitting or finish. To maintain the
appearance of the fitting, please ensure it is cleaned regularly using only a clean soft damp cloth. Whilst all
of our products are durable the finishes are vulnerable to some strong substances, we only recommend the
use of warm soapy water, DO NOT use abrasive sponges, strong household cleaners, scouring agents, organic
solvents or acidic cleaners as they may cause surface deterioration, peeling or change of colour.
Traditional Shower Set
www.cavalierbathrooms.co.uk
Instruction
C20 V2
Advertisement
