Indicator & Function - Guardian Pro Max Dual HEPA Use & Care Instructions Manual

TEMP
ºF
Temperature
Displays
Temperature
in degrees
Fahrenheit
Filter Replacement
Illuminates when the
filter has reached
6 months of use
IMPORTANT: The air purifier is shipped with the filters stored in the filter compartments.
The filtes are shipped in bags to prevent degradation. Before using, remove and discard bags.
SET UP PRODUCT FOR USE
1. Select a firm, level and flat location for the air purifier. The purifier is equipped with wheels
for easy transport.
• For proper air flow, locate the unit at least 1 foot from any wall or furniture.
• Make sure none of the grills are blocked.
2. Plug the power cord into a 120V AC outlet.
OPERATING THE AIR PURIFIER
1. Turn unit power ON by touching the control icon on the top of the unit. When the
device is turned on, the power LED is fully on. By default it remains half on when
the device is switched off. Note: The purifier will not work if both side filter panels are
not closed. The first time the unit is plugged in and power on, the air quality sensor
will take 1 minute to calibrate.
2. Fan Speed - Select between level 1-5 fan speeds. Increase or decrease by touching the fan
icons. Each touch will change the fan speed by 1 level.
Decrease
3. Child Lock –Touch and hold for 3 seconds to lock control panel so controls cannot
be adjusted. Touch and hold for 3 seconds again to turn feature off.
INDICATOR & FUNCTION
Child Lock Icon
Illuminates when
the Child Lock
feature is turned on
AQI
AQI Reading
AQI readings should
be between 1-500
and based off of
the EPA's AQI scale
OPERATING INSTRUCTIONS
Night Mode Icon
Illuminates when
the Night
Mode is on
AQI Color
AQI Readings between
1-100 (Green),
101-200 (Yellow),
201-500 (Red)
Increase
Auto
Auto Icon
Illuminates when
the Auto
feature is on
Fan Speed
Should be a number
between 1-5
E-5