Table of Contents
Advertisement
EN|ENGLISH
Our warranty applies only to defects discovered within the warranty period,
and due to the industrial, technological and structural defects, ie. admitted
the fault of the manufacturer.
The warranty does not apply to:
А) Product malfunction resulting from:
1. non-compliance with the requirements of the operating manual;
2. mechanical damage caused by external influence or any other reason;
3. misuse of the machine;
4. the impact of adverse weather and external factors on the product, such as
rain, snow, high humidity, heat, aggressive media, supply mismatched
electrical requirements of the manual;
5. the use of accessories, consumables and spare parts not covered by the
technological structure of the model;
6. ingestion of foreign objects or products clogging the vents a lot of waste,
such as dust, sawdust, shavings, etc.
B) The items, that were subjected to stripping, repair or modification by
unauthorized persons.
C) Failures caused by improper handling or storage of the machine, signs of
which are:
1. the presence of rust on the metal elements of the product;
2. the presence of oxides of the engine manifold;
3. breaks and cuts of the supply cord;
4. chips, scratches, strong abrasions of housing.
D)Malfunctions caused by overloading the product which caused the failure
of the motor or other components and parts.
To definite signs of overload refers:
- deformation or melt plastic parts and assemblies of the machine;
- emergence of scale on the collector of motor or on carbon brushes;
- simultaneous failure of armature and stator;
- darkening or charring of the wire insulation.
Attention! When buying a product require a verification completeness and
serviceability.
7
Advertisement
Table of Contents
