• For extension cords with lengths up to 15 meters using wire cross-section
of 1.5 mm2.
• For the extension cords with a length of over 15 meters, use the cross-
section of 2.5 mm2.
• Protect your extension cords from sharp objects, excessive heat and placing
in a damp or wet location. Before use, remove all damaged extension cord
instrument and, if damaged, contact an authorized service center for
replacement. Work dry, clean and free from oil and grease hands.
Remain alert
Before using the tool, check all the parts and components for damage.
Check the integrity of the housing of the power tool, properly set up the
moving parts, make sure that they are not binding.
Check the availability and performance of all switches (especially ON/OFF)
and parts. If necessary, contact an authorized service center for repair or
replacement. • If devices require mounting, make sure that it is securely
attached to a suitable workbench.
DESCRIPTION AND CHARACTERISTICS
Voltage,
Model
РАЕ600
220
РАЕ900
220
РАЕ1050
220
РАЕ1250
220
РАЕ1350
220
Frequency,
V
Hz
50
50
50
50
50
Power, W
diameter,
600
900
1050
1250
1350
3
EN|ENGLISH
Disc
No-load
speed, rpm
mm
150
2950
150
2950
150
2950
200
2950
200
2950