Table of Contents
Advertisement
Quick Links
EN|ENGLISH
Bench Grinders
PAE600, PAE900, PAE1050, PAE1250, PAE1350
INSTRUCTIONS
Carefully read the instructions before first use of the product. Please keep
the manual for future use.
Grinder (hereinafter - sharpener) is designed for sharpening chains, knives,
scythes, and other household and professional tools. The product is equipped
with a grinding wheel abrasive wheel, the rotational motion is combined with
suitable materials allows the best way to handle a necessary tool. The
product is intended for domestic use, not for commercial use.
GENERAL SAFETY RULES
• For every 15 minutes of operation, the device shall be at 15 minutes of rest.
• The mains power must match the value specified on the nameplate of the
tool.
• Repairs should be performed only by qualified personnel at authorized
service centers.
• Opening or dismantling the tool terminates the free warranty service
• Please, before first use of the product, carefully read and follow these
instructions. It is specially designed for your safety and the safety of others,
as well as to ensure a long and trouble-free service life of your equipment.
Warning
It is strongly recommended not to make any changes in the design of the
power, or use it for other purposes, as well as the use of any devices or
accessories other than those recommended in this manual - it may cause
damage to the tool or injury to the operator.
• Use the tool exactly as prescribed
• Do not use the tool for the job for which it was not designed (for heavy
work needs a tool designed for the harsh conditions of work; for the light
work sufficiently low power tool). Do not use the tool for the purpose for
which it was not designed. This instrument applies to domestic class and is
not intended for commercial use.
Working area
• Cluttered benches and work areas provoke accidents. Benches should be
kept in a neat condition. Floors should be clean and free of debris. Special
precautions should be taken in areas where the floor is slippery due to the
presence of sawdust or wax.
Work environment
1
Advertisement
Table of Contents
Summary of Contents for PROCRAFT PAE600
- Page 1 EN|ENGLISH Bench Grinders PAE600, PAE900, PAE1050, PAE1250, PAE1350 INSTRUCTIONS Carefully read the instructions before first use of the product. Please keep the manual for future use. Grinder (hereinafter - sharpener) is designed for sharpening chains, knives, scythes, and other household and professional tools. The product is equipped with a grinding wheel abrasive wheel, the rotational motion is combined with suitable materials allows the best way to handle a necessary tool.
- Page 2 EN|ENGLISH • Do not expose your power tools to rain or use it in damp or wet locations. Maintain a well-lit work area. Do not use power tools in areas where there is risk of fire or explosion due to the presence of combustible materials, flammable liquids, paints, varnishes, gasoline, etc., flammable gases and dust having explosive.
-
Page 3: Description And Characteristics
EN|ENGLISH • For extension cords with lengths up to 15 meters using wire cross-section of 1.5 mm2. • For the extension cords with a length of over 15 meters, use the cross- section of 2.5 mm2. • Protect your extension cords from sharp objects, excessive heat and placing in a damp or wet location. - Page 4 EN|ENGLISH 1. Abrasive circle 2. Metal-bearing area 3. On / off key (ON / OFF) 4. The protective cover 5. Protective Screen 6. Lock the shield 7. The motor housing 8. Lock-site support WARNING! Due to the constant improvement of the design, power may have changes in design and specifications without notice users.
-
Page 5: Getting Started
EN|ENGLISH BEFORE START Unpacking Carefully unpack the instrument and the necessary parts. Retain the packaging for future storage. Remove the remaining packages of moving parts (if any). GETTING STARTED Before you start, be sure to check that the mains voltage and power values, being on the technical label on the unit. -
Page 6: Replacing Supplies
EN|ENGLISH Start processing material only when reliable locking of the processed material (workpiece). Perform work smooth confident movements. WARNING! Some sites and cutting parts in the process can be heated. Exclude contact with hot parts before and after work. Be careful not to put your hands on the path or on the axis of the cutting or working elements in the process - this can lead to injury. - Page 7 EN|ENGLISH Our warranty applies only to defects discovered within the warranty period, and due to the industrial, technological and structural defects, ie. admitted the fault of the manufacturer. The warranty does not apply to: А) Product malfunction resulting from: 1. non-compliance with the requirements of the operating manual; 2.
-
Page 8: Ce Declaration Of Conformity
CE DECLARATION OF CONFORMITY We Vega Trade Company Limited as the responsible manufacturer declare Bench Grinders TMProcraft: PAE600, PAE900, PAE1050, PAE1250, PAE1350 are of series production and сonfirms to the following European Directives: 2006/42/EC And are manufactured in accordance with the following standards or...