Download Print this page

Advertisement

Quick Links

UTS 700 ONEMAN
Instruction Manual
Mobile Access Tower
3T - Through the trap method
Instruction Manual EN 1004-2 en x cz x es x fr x pl
UTS SALES & REPAIRS LTD
www.towersandpodiums.co.uk
info@towersandpodiums.co.uk
UTS SALES & REPAIR LTD
Manufactured to: ISO 9001
Instruction Manual
This Assembly Guide is intended to provide you
with step-by-step instructions on how to erect your
Mobile Access Tower (MAT) with ease and safety,
using the 3T (through the trap) method.
You should read and understand all notes and
diagrams, including the parts list for each height,
before commencing assembly. Personnel should
be qualified or competent to erect this tower.
Please consult the PASMA's code of practice for
full information on the use of Mobile Access
Towers.
Remember to do a risk assessment of the area
where the tower is to be used before commencing
erection.
This instruction manual shall be available on the
location of use of the mobile access and working
tower.
This mobile access and working tower shall only be
used according to this manual without any
modification.
Mobile access and working towers must only be
used in accordance with national regulations.

Advertisement

loading
Need help?

Need help?

Do you have a question about the UTS 700 ONEMAN and is the answer not in the manual?

Questions and answers

Summary of Contents for UTS UTS 700 ONEMAN

  • Page 1 Mobile access and working towers must only be used in accordance with national regulations. UTS SALES & REPAIR LTD Manufactured to: ISO 9001 Instruction Manual EN 1004-2 en x cz x es x fr x pl UTS SALES & REPAIRS LTD www.towersandpodiums.co.uk...
  • Page 2 UTS 700 ONEMAN INSTRUCTION MANUAL Page 2...
  • Page 3 Page Description Safety Notes & Fittings Inspection Care and Maintenance Components and Weights Assembly Dismantling Configurations and Weights Risk Assessment Form UTS SALES & REPAIRS LTD UNIT 1A CANTERBURY INDUSTRIAL PARK, ISLAND ROAD, HERSDEN, CANTERBURY, KENT, CT3 4HQ TEL:01227860085 WWW.TOWERSANDPODIUMS.CO.UK UTS SALES &...
  • Page 4 Executive (HSE) & the “working at height regulations 2005” The method used for erecting and dismantling the UTS 700 ONEMAN tower is the 3T METHOD (through the trap). This method ensures the operators erecting the tower position themselves in the trapdoor of the platform to add or remove horizontal guardrail braces for the level above the platform.
  • Page 5 User training courses cannot be a substitute for instruction manuals but only complement them. • Only the original UTS components specified in the manual shall be used. • Mobile access and working towers designed in accordance with BS EN 1004-1:2020 are not anchor points for personal fall arrest equipment.
  • Page 6: Locking Clips

    Strong Breeze Large branches in motion, 25–31 22–27 telegraph wires whistle. Gale Force Walking is difficult, twigs 39–46 34–40 break off trees. LOCKING CLIPS Fit the locking clips as shown in the diagram opposite. UTS 700 ONEMAN INSTRUCTION MANUAL Page 6...
  • Page 7 (and not to gain additional height). UTS SALES & REPAIRS LTD Page 7...
  • Page 8 Weight (Kg) Item Description Weight (Kg) 150mm Locking Caster 1.3m OMT Brace Adjustable Leg 500mm Complete Toe Board Set 1m 4 Rung Frame OMT Hanging Bracket 1.3m Trapdoor Platform S3 Stabiliser 1.3m Horizontal Brace UTS 700 ONEMAN INSTRUCTION MANUAL Page 8...
  • Page 9: Assembly Procedure

    Assembly Procedure UTS recommends that a minimum of two people is required for the assembly of the UTS 700 ONEMAN tower. Only climb the tower from the inside using the end rungs. Insert adjustable leg assembly (with castors or base plates) into the base of a rung end frame, the repeat this with the other rung end frame.
  • Page 10 Insert 4 rung sides onto each end of the tower, ensure they clip in (refer to page 6) Fit OMT Brace to 6th and 8th rungs of towers, ensure bottom clamps are locked. UTS 700 ONEMAN INSTRUCTION MANUAL Page 10...
  • Page 11 Fit a trap door platform to 4th rung of the tower, engage the wind locks. If completing at 1.2m fit toe boards to the working platform. (see instructions on page 4 & 5) If not continue to page 12. UTS SALES & REPAIRS LTD Page 11...
  • Page 12 Fit these double 4 rung ends to each end of the tower as shown. Fit a OMT Brace to the 9th and 11th rungs of the tower, the hang an assembly bracket from it to all the easy moving of components to higher levels. UTS 700 ONEMAN INSTRUCTION MANUAL Page 12...
  • Page 13 From a seated position within the trap door of the platform fit a OMT Braces to the 14th and 16th rungs of the tower, then ensure the bottom clamps are locked. Fit toe boards to the working platform. (see instructions on page 4 & 5) UTS SALES & REPAIRS LTD Page 13...
  • Page 14 Fit a OMT Brace to the 5th and 7th rungs of the tower, the hang an assembly bracket from it to all the easy moving of components to higher levels. Fit a trap door platform to 8th rung of the tower, engage the wind locks. UTS 700 ONEMAN INSTRUCTION MANUAL Page 14...
  • Page 15 If completing at 2.2m fit toe boards to the working platform. (see instructions on page 4 & 5) If not continue to page 16. UTS SALES & REPAIRS LTD Page 15...
  • Page 16 From a seated position within the trap door of the platform fit a OMT Braces to the 18th and 20th rungs of the tower, then ensure the bottom clamps are locked. Fit toe boards to the working platform. (see instructions on page 4 & 5) UTS 700 ONEMAN INSTRUCTION MANUAL Page 16...
  • Page 17 45°. If being used in a corner, the closed corner stabiliser can be removed and the 2 near walls should be made parallel with the open corner stabiliser remaining at 45°. WALL UTS SALES & REPAIRS LTD Page 17...
  • Page 18 1m 4 Rung Frame 1.3m Trapdoor Platform 1.3m Horizontal Brace 1.3m OMT Brace Complete Toe Board Set OMT Assembly Tool Instruction Manual S3 Stabiliser Approx. Tower Shelf weight (Kgs) 75.4 117.2 149.5 167.7 1.8m Notes: UTS 700 ONEMAN INSTRUCTION MANUAL Page 18...
  • Page 20 Notes: SALES & REPAIR LTD UNIT 1A CANTERBURY INDUSTRIAL PARK, ISLAND ROAD, HERSDEN, CANTERBURY, KENT, CT3 4HQ TEL: 01227 860085 WWW.TOWERSANDPODIUMS.CO.UK DOC NO: OM001, VERSION:1.1, DATE:01/01/21, APPROVED BY:A.GUNTRIPP, REVIEWED BY:M.GRANGER UTS 700 ONEMAN INSTRUCTION MANUAL Page 20...