Extreme Networks ES660B User Manual page 14

HOW TO SPRAY SILICONE ON DECK?
A). Find the silicone bottle. It is located in the hardware kit package included with this treadmill.
B). Find a straw and put it onto the silicone bottle as the drawing shows.
C). Spray silicone evenly on treadmill deck as the drawing shows. (ATTENTION: The treadmill MUST
BE STOPPED before applying the silicone lubricant. This is to prevent injury, otherwise the edge of the running belt may cut you or
your fingers could be crushed by the rollers. )
Do not put too much silicone on the deck. Excessive lubricant may cause slippage of the belt on the rollers.
HOW TO SPRAY SILICONE ON DECK?
1. Speed error signal: "OVER SPEED"
Solution: 1). Adjust the position of speed sensor wire
2) Replace the speed sensor wire
2. The safety key is not connected: "SAFETY KEY OFF"
Solution: 1）Adjust the position of the safety key.
2) Replace the switching line of safety key.