Turning The Camera On And Off; Configuring Power Saving Settings - Casio K823PCM1DMX User Manual

GETTING READY

Turning the Camera On and Off

Press the power button to turn the camera on and off.
Pressing the power button to turn on the camera causes
the green operation lamp to flash. Press the power button
again to turn off the camera.
Power button
IMPORTANT!
• If camera power is turned off by the Auto Power Off
feature, press the power button to turn it back on
again.
• Turning on camera power while the mode dial is set
to REC mode causes the lens to extend from the
camera. Make sure there is nothing in front of the
camera that can be hit by the lens when you turn on
the camera.
Green operation lamp
47

Configuring Power Saving Settings

You can configure the settings described below to
conserve battery power.
Sleep : Automatically turns off the monitor screen
if no operation is performed for a specified
amount of time in the REC mode.
Performing any button operation causes
the monitor screen to turn back on.
Auto Power Off : Turns off power if you do not perform any
operation for a specified amount of time.
1.
Turn on the camera.
2.
Press [MENU].
3.
Use [ ] and [ ] to select the "Set Up" tab.
4.
Use [ ] and [ ] to select the feature whose
setting you want to configure, and then press
[ ].