Ecofrog AVATAR User Manual
Hide thumbs Also See for AVATAR:

Advertisement

USER MANUAL
Version 1.4
FOR A BETTER TOMORROW

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AVATAR and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Ecofrog AVATAR

  • Page 1 USER MANUAL Version 1.4 FOR A BETTER TOMORROW...
  • Page 2: Table Of Contents

    CONTENTS Pag. Caring for the environment, a responsibility for us all Welcome to the ECOFROG family! The ECOFROG system zone technology and its properties Notes and preliminary remarks on this manual Package content Avatar applications Technical specifications Instructions for use and safety considerations Warnings/safety measures Hazard identification.
  • Page 3: Caring For The Environment, A Responsibility For Us All

    Caring for the environment, a responsibility for us all. The ECOFROG project was created as a solution to meet an increasing demand from our society in recent years: the creation of eco-friendly cleaning systems that are healthy for users. Although according to their nature and definition, cleaning systems should, in principle, be eco-friendly and healthy for humans, the majority of solutions are not.
  • Page 4: Welcome To The Ecofrog Family

    Welcome to the ECOFROG family! Today, ECOFROG has a range of products to cover a wide range of needs. Avatar, our flagship for professional use; Wash by Ecofrog, the perfect complement to Avatar for use in industrial dishwashers; Elektra, intended primarily for domestic use;...
  • Page 5: The Ecofrog System

    The ECOFROG system The efficiency of the ECOFROG system applied to domestic use, thanks to its exclusive, patented O zone technology, has led to the project being developed in other professional channels and areas, with different needs and requirements, for a highly varied sector, towards eco-friendly, healthy cleaning and disinfection.
  • Page 6: Zone Technology And Its Properties

    > Acts in less time than other chemical products. zone is generated through the technology used by the whole range of ECOFROG products. This is injected immediately into the water molecule and provides high stability in the resulting mixture (ozonised water), allowing you to clean, degrease, deodorise and disinfect.
  • Page 7: Notes And Preliminary Remarks On This Manual

    6.- Keep the Avatar packaging for 14 calendar days in case you wish to return the product. USER MANUAL...
  • Page 8 9.- Our company is not liable for any loss, direct or indirect damage caused by users or third parties, owing to the incorrect use of Avatar. 10.- The contents of this manual are subject to changes without prior notice.
  • Page 9: Package Content

    - Assembly screws and plugs (6 mm Ø) - 1 Power supply transformer. Avatar can work with hot water up to 35°C and has three levels of ozone; high - 1 3/4" water supply hose. level (100%), low level (50%) and a non-ozone level (0%). These are controlled - 1 Tap.
  • Page 10: Technical Specifications

    Model: Avatar Inlet / Electrical consumption: AC 100 - 240V/50 - 60 Hz Use a soft cloth moistened with ozonised water. Do not clean the Avatar Outlet / Electrical power: DC 12V 3A Ozone level (3 levels): 100% - 50% - 0% equipment with chemicals.
  • Page 11: Warnings/Safety Measures

    (0.02 ppm, equivalent to 0.1 mg/m ) provided that the handling > During ozone production and dissolution in water by the Avatar equipment, instructions set out in this manual are followed. part of the ozone produced is not dissolved and remains in gaseous form, passing into the air as it leaves the equipment.
  • Page 12: Water Requirements

    The level of exposure depends on the duration and the work to be A water pressure range of 1 to 3.5 BAR static is optimal for proper Avatar performed. It is therefore very important to follow the instructions in this operation.
  • Page 13: Avatar Dimensions

    Avatar dimensions 255 mm LED display zone level touch selector zone level touch 380 mm selector 1/2" Outlet "OUTLET" Inlet "INLET" 3/4" outlet "OUTLET" 81 mm USER MANUAL USER MANUAL...
  • Page 14: Led Panel

    Stand-by: When Avatar is on stand-by, it is connected to the power supply and ready to operate automatically once water flows inside, without the need to press any button.
  • Page 15 The dryer switches on automatically when the Avatar is operating and stops when it is no longer in operation. After 3 hours from when the Avatar was last in operation, the dryer will switch on for approximately 30 minutes. Once the...
  • Page 16: Fault Indicator

    There may be a limescale build up or water residue obstructing the Avatar ducts. If a fault occurs, the light will change to red and start flashing. Avatar is able Change the hose so that it connects the water tube to the Avatar “OUTLET” and to detect in which element a fault has occurred and will indicate this in the the extraction (or outlet) hose to the "INLET"...
  • Page 17: Instructions For Use

    To obtain ozonised water to apply to surfaces and/or utensils, it is important to Avatar can work with washing machines up to a maximum load of 12 kg. bear in mind the fact that the machine generates around 5.5 litres per minute with a static water pressure of 3.5 Bar, which is more than enough time to ge-...
  • Page 18 Use on SURFACES Instructions for use on COOKING PLATES USER MANUAL USER MANUAL...
  • Page 19 Instructions for use on CUTLERY and UTENSILS Instructions for use on SLICING MACHINES USER MANUAL USER MANUAL...
  • Page 20: Frequently Asked Questions

    It cannot be used with salt water. Does Avatar work with industrial washing machines No, Avatar is designed to work ideally in washing machines up to 8 kg, and can work up to a maximum of 12 kg. We have a specific model designed for higher capacity washing machines and industrial systems.
  • Page 21: Warranty Specifications

    Warranty specifications The legal guarantee that covers the Avatar product is the one that is regulated at all times by current regulations regarding the lack of conformity of the product from the moment of its delivery or commissioning to the client and/ or final consumer.
  • Page 22 RECYCLE AVATAR's box and packaging parts are produced from recycled material. The protective cover of the AVATAR is manufactured with eco-friendly polypro- pylene, as water is not used in the production process. It disintegrates if perma- nently exposed to the sun and is manufactured using pollutant-free materials.
  • Page 23 ECOFROG FACTORY...

Table of Contents