Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Avid CNC CRP800
Summary of Contents for Avid CNC CRP800
- Page 1 Plug and Play Spindle / VFD System CRP800 Setup Guide v2020Q4.1...
- Page 2 Info If you are using Mach3 CNC controller software, please refer to our Mach3 CRP800 VFD Setup Guide. Control Box Connections Connect the 14-pin male-to-male cable to your Spindle / VFD System and CNC Control Unit. 8.7 HP Plug and Play Spindle / VFD System If you are upgrading to the 8.7 HP Plug and Play Spindle / VFD system, ensure you use the new 14-pin cable that came with your...
- Page 3 8.7 HP Plug and Play Spindle / VFD System L21-30 receptacle (200-240VAC three-phase) If running on single-phase, refer to power requirements for this system. Version 2020Q4.1 Plug and Play Spindle/VFD © 2020 Avid CNC CRP800 Setup Guide All Rights Reserved...
- Page 4 Spindle Connection 3 HP Spindle Connect the female end of the M23 spindle cable to the spindle, aligning the arrows as in the previous step. Version 2020Q4.1 Plug and Play Spindle/VFD © 2020 Avid CNC CRP800 Setup Guide All Rights Reserved...
- Page 5 Connect the female end of the M23 spindle cable to the spindle. Ensure the connector is seated before tightening. Refer to the picture, as this is critical for proper spindle operation. Version 2020Q4.1 Plug and Play Spindle/VFD © 2020 Avid CNC CRP800 Setup Guide All Rights Reserved...
- Page 6 If you have not configured Mach4 for your machine, follow the steps in the CNC Software Setup Guide. If you are currently using Mach4, you will need to reconfigure Mach4 with the Avid CNC Mach4 Configuration menu. When selecting a Cutting Tool you will use "Spindle" (or "Spindle / Plasma"...
Need help?
Do you have a question about the CRP800 and is the answer not in the manual?
Questions and answers