Advertisement
Thrift-O-Matic Machine
Set Up and User Guide
THIS MACHINE IS DESIGNED TO OPERATE A MAXIMUM OF TWO HOURS PER DAY
or half an hour con�nuously. Premature wear or premature damage of the machine will occur if
the machine runs longer than the maximum limit and will void the warranty.
SAFETY PRECAUTIONS
This machine is intended for use by trained professionals in industrial work areas where public and incidental access is prohibited.
1. OSHA approved eye protec�on must be worn when opera�ng equipment.
2. Gloves must be worn when handling parts because the edges may be sharp.
3. Keep hands and loose clothing away from moving parts.
4. Disconnect electrical power before performing any service on this machine.
5. Do not pick up the cans by the fork adapters.
6. Examine each can before placing them on the machine. The paddle must turn freely. Dented cans may result in premature wear, leakage, or spills.
7. All operators must read this manual to be aware of the proper use of the machine and all of its cau�on markings.
MACHINE SET UP
The Dedoes Eight Place Thri�-O-Ma�c Mixing System comes fully assembled and the required electrical hook up is ready for use. The system should be located on a level
surface in a convenient, well lit area. The mixing equipment is assembled with lock nuts and bolts. However, it is important that all nuts and bolts are inspected before use
as some may have become loose during transit.
ELECTRICAL INSTALLATION
There are two wires coming out of the motor which must be wired to the power supply by a cer�fied electrician. Power supply and other electrical connec�ons
MUST conform to all federal, state, and local regula�ons and MUST be performed only by a fully qualified electrician. All electrical connec�ons MUST comply with local fire
codes. Dedoes assumes no liability if improper wiring is not completed by a cer�fied electrician. Dedoes RJ Thri�-O-Ma�c Machines are equipped with a 1/4 HP, Single
Phase, 115V, 60 Hz., explosion proof, cULus (Class 1, Div. 1, Group D) motor. All motors come from the factory wired for 115V service.
IMPORTANT: CONDUIT FOR HAZARDOUS LOCATIONS MUST BE USED.
MACHINE BREAK IN
A�er the machine is completely installed and before placing the paint on it, run the system for approximately thirty minutes. Pay close a�en�on to the machine during this
�me to be sure it is opera�ng correctly. A�erward, check and adjust the belt tension if necessary. (See Maintenance for reference)
PRODUCT WARRANTY POLICY
Dedoes Industries warrants the Dedoes Thri�-O-Ma�c Machine against defects due to defec�ve material, design or manufacturing to the end user for a period of two
years. This warranty covers all manufactured parts on the products that are defec�ve or damaged. All products, goods, services and equipment comply with all applicable
environmental, safety, design, and regulatory laws, regula�ons, customs, and requirements of the region in which they are delivered and put into service. This warranty
does not cover any items that have been damaged due to mu�la�on, altera�on, misuse, or abuse. Corrosion due to neglect or chemicals is not covered by this warranty.
Dedoes will not be responsible for loss of �me, inconvenience, or other consequen�al damages. Dedoes assumes no liability if proper wiring is not completed by a
cer�fied electrician.
The warranty is void:
• If not properly wired to applicable codes by a cer�fied electrician
• If not installed, assembled, or aligned properly
• If Dedoes parts are not used for repairs or installa�on
This is the only warranty on Dedoes products and no other expressed warranty by anyone other than Dedoes, in wri�ng, will be binding on the manufacturer. This
warranty is transferable from the loca�on of the original installa�on of the equipment to any addi�onal installa�on loca�ons within the warranty �me period.
Warranty Return Policy: Under no circumstance should the product or any part there-of be returned to Dedoes for inspec�on, replacement, and/or repair without the
wri�en consent from Dedoes Industries. Returned items must be in original unused condi�on, unless there is a manufacturer defect. Please contact Dedoes at
1-248-624-7710 to obtain a Returned Goods Authoriza�on Number and to discuss other specifics of the return.
Advertisement
