BEA 10MAGLOCK1UL Quick Start Manual

1200 • 1200 • 1200 • 1200 • 1200 • 1200 • 1200 • 1200 • 1200 • 1200
• 1200 • 1200 • 1200 • 1200 • 1200 • 1200 • 1200 • 1200 • 1200 •
1200 • 1200 • 1200 • 1200 • 1200 • 1200 • 1200 • 1200 • 1200 • 1200

1 Description

The Electromagnetic Lock (Maglock) series is a surface mounted magnetic lock assembly. Available in single and dual lock varieties
and various sizes (force) designed for standard installation on most types of doors.
10MAGLOCK1UL

2 Specifications

DESCRIPTION
Lock
Imput Voltage
Relay Rating: @ 24 VDC (amps)
Dimensions:
Certification:

3 Precautions

Shut off all power before attempting any wiring procedures.

!
Maintain a clean & safe environment when working in public areas.

Constantly be aware of pedestrian traffic around the door area.

CAUTION
Always stop pedestrian traffic through the doorway when performing tests that may result in unexpected reactions by the door.

Always check placement of all wiring before powering up to insure moving door parts will not catch any wires and cause

damage to equipment.
Ensure compliance with all applicable safety standards and building codes upon completion of installation.


4 Installation - Mechanical

1. Handle the equipment with care. Damaging the mating surfaces of the magnet and armature plate may reduce locking efficiency.
2. The maglock mounts rigidly to the door frame. The armature plate mount to the door with the hardware provided. This allows the
armature plate to pivot about its center to compensate for door wear and misalignment.
3. Template use must take place with the door in its normally closed position.
4. Add threadlocker to all screws before installing.
5. Firmly tighten screws.
75.5367.01 20110715
SINGLE
10MAGLOCK1UL
Single
(VDC) 12 or 24
1.0
inches 10.47 x 2.87 x 1.58
(mm) (266 x 73 x 40)
UL
1200 UL MAGLOCKS
10MAGLOCK5UL
Double
12 or 24
1.0
21.18 x 2.87 x 1.58
(532 x 73 x 40)
UL
USER'S GUIDE
ELECTROMAGNETIC LOCK
DOUBLE
10MAGLOCK5UL
Page 1 of 2