Controls And Behavior - flight of harmony Sinner Manual

Usage note: Feed, Sin, and Size, can each reduce output to 0V when turned
fully CCW.
Feed: Input level attenuator. Clockwise (CW) to increase, counterclockwise
(CCW) to decrease (fig. 2). This control is mainly for reducing strong signals to
give more responsiveness to the other controls, so it is recommended to leave this
fully CW for standard usage.
Sin: Amount of rounding applied to signal. CW for more, CCW for less. Sin
also affects the amplitude of the signal (fig. 3). The amount of rounding applied
also depends on the signal amplitude, which is controlled by Feed (fig. 4).
fig.3: Effect of increasing Sin control.
Waver: Applies from 0 to ±4.8VDC bias to the signal. CW for positive,
CCW for negative.
fig.5: Effect of Waver positive increase.
SIN-E v1.0 manual Mar. 2022 — p.3/6

Controls and Behavior

fig.2: Effect of increasing Feed control.
fig.4: Effect of Feed on Sin.
fig.6: Effect of Waver negative increase.
www.flightofharmony.com