Table of Contents
Advertisement
AC output will automatically shut off.
6．TROUBLESHOOTING REFERENCE
Acoustics buzzer alarms
When applying the inverter to acoustics device, some inferior acoustics device will buzz, this is
because the output wave from the inverter is modified sine wave inverter.
Note: * When 190%≤Load≤200%,limit current of AC output, that's to say AC Output Voltage
decreasing, output shut down, delay 60s to restart automatically, once ten consecutive restart
automatically, then you have to start the inverter by manual.
7. Maintenance
To keep your inverter operating properly, there is very little maintenance required. You should
clean the exterior periodically with a dry cloth to prevent accumulation of dust and dirt. At the
same
tome, tighten the screws on the DC input terminals.
II- MPS SYSTEM
8. GENERAL INFORMATIONS
I
nverter with MPS (Mains Priority System) function is a combination of an inverter and AC Auto
transfer switch into one complete system with a peak dc to ac conversion
advanced system in the market today.
MPS System : it also called the AC priority .the AC power will be direct to
the loads through bypass ways. For example when connecting to the mains on a motorhome service
area, the converter automatically selects the 230V, thus stopping the use of 12V batteries. It is not
necessary to disconnect the batteries in order to use the mains.
MPS (Mains priority system) Mode: the AC input of the inverter is continually monitored.
Whenever AC power falls ,the inverter automatically transfers back to the inverter mode with minimum
power interruption to your appliances as long as the inverter is turned on. The transfer time is usually
fast enough to keep your equipment (including computers) powered up. The time will be less than 16
milliseconds
9. APPLICATIONS
Kitchen appliances – coffee makers, blenders, ice markers, toasters.
Household items – vacuum cleaners, fans, fluorescent and incandescent lights, shavers.
8
Hide quick links:
Advertisement
Table of Contents
