Download Print this page

Waterworks EEBT01 Installation Manuallines

Advertisement

Quick Links

INSTALLATION GUIDELINES
IMPORTANT:
Immediately after receiving the BATHTUB and removal of packing,
you MUST inspect the unit for freight damage. Any claims for damage,
whether apparent or hidden, must be made to the carrier immediately
in order for them to assume all associated costs. Should inspection
reveal any defect in the finish, do not install the BATHTUB. Damage or
defect to the finish claimed after the BATHTUB is installed is excluded
from the warranty. The warranty DOES NOT cover labor or materials
to remove or re-install the BATHTUB.
To ensure this product is installed properly, you must read and follow
these guidelines.
The owner/user of this product must keep this information for future
reference.
CAUTION: This product is extremely heavy and adequate floor support
is required. Ensure the product is properly supported by the base.
This product must be installed by a professional licensed contractor.
Be sure your installation conforms to all federal, state, and local codes.
Inspect this product to assure it is the correct model and you have
all parts required for proper installation. Take all the necessary
precautions to ensure this product is protected during installation and
do NOT install this product if it has been damaged.
All final connections are made below the finished floor. Accessibility
below the finished floor is required.
The use of certain plumber's putty may stain stone or tile surfaces.
WARNING: The following basic safety precautions should always be
followed when using your BATHTUB.
Caution should always be exercised when entering or leaving the
BATHTUB.
DANGER: To reduce the risk of injury, do NOT permit children
or persons with a disability to use the BATHTUB without close
supervision.
Keep all electrical appliances such as radios and hairdryers a safe
distance from the BATHTUB.
Do NOT use the BATHTUB when sleepy or drowsy, under
the influence of alcohol or prescription medications or when
overheated.
If further assistance is required, please contact Product Support at
1-800-927-2120 Monday through Friday, 8am – 6pm EST.
PRODUCT SUPPORT | 800.927.2120 | WATERWORKS.COM
TECHNICAL DETAILS:
DETAIL
ADJUSTABLE LEVELERS/FEET
DRAIN HOLE DIAMETER
OVERFLOW HOLE DIAMETER
SINGLE OR DOUBLE ENDED
WATER CAPACTIY
DRY
WEIGHT
FILLED
REQUIRED PLUMBING DETAILS:
Universal Drain Plug Waste and Overflow Drain
STYLE No. UNWO76
STYLE No. EEBT01
Emile 67" x 27" x 27-1/2" Freestanding Oval
Cast Iron Bathtub
SPECIFICATION
YES
2-1/16" [53mm]
2-1/16" [53mm]
DOUBLE ENDED
57 gal [215 liters]
437 lbs. [198 kg]
912 lbs. [414 kg]
PAGE 1 OF 4 | UPDATED ON 4.29.2021

Advertisement

loading

Summary of Contents for Waterworks EEBT01

  • Page 1 If further assistance is required, please contact Product Support at  1-800-927-2120 Monday through Friday, 8am – 6pm EST. PRODUCT SUPPORT | 800.927.2120 | WATERWORKS.COM PAGE 1 OF 4 | UPDATED ON 4.29.2021...
  • Page 2 TAILPIECE. NOTE: A 3” diameter ESCUTCHEON is provided with the UNWO76 to conceal the hole in the floor. PRODUCT SUPPORT | 800.927.2120 | WATERWORKS.COM PAGE 2 OF 4 | UPDATED ON 4.29.2021...
  • Page 3 FLOOR and ensure the SHOE. apply pipe thread sealant to the TAILPIECE and BATHTUB sits level. thread it into the TEE. NOTE: The BATHTUB includes adjustable levelers. PRODUCT SUPPORT | 800.927.2120 | WATERWORKS.COM PAGE 3 OF 4 | UPDATED ON 4.29.2021...
  • Page 4 16. Slide the ESCUTCHEON down the OVERFLOW PIPE until it contacts the floor then cover the BATHTUB surface with a liner or other protective material (not supplied) until construction complete. PRODUCT SUPPORT | 800.927.2120 | WATERWORKS.COM PAGE 4 OF 4 | UPDATED ON 4.29.2021...