avenli SPA5 User Manual page 15

10) Smooth the liner all
around the SPA
to ensure a good fit.
13) Check that the drain
plug is closed properly.
Warning: Do not leave spa unattended while filling with water.
Make sure the drain fitting is plugged securely and the cap is in place. Start filling the spa
with water. After about 1-inch of water is on the bottom, stop filling and smooth
wrinkles out of the bottom of the spa. Pull the outer wall out from the top edge, all
around the bottom of the spa, so that it fills evenly
Continue filling the spa until water level.
11) Connect the unit pump
to the pool using the 3
connectors to screw.
Ensure the icons on the
pump and the pool match
up.
14) Fill the spa pool until
the indicated fill level is
reached. Your spa is ready
to be used.
15
12) Insert the cartridge into
its filter holder and then
screw on the suction fitting
inside the basin. Cartridge
location as shown.