Advertisement
06
5. CHARGING STEPS
Step
1
Voltage(V)
Current(A)
STEP 1: DIAGNOSIS (Check if battery has connected with the charger and also check battery voltage)
STEP 2: ANALYSE (Check if battery can reach to the threshold after charging for a period)
STEP 3: DESULPHATION (Desulfation process by pulsing)
STEP 4: SOFT START (Charge with echelon constant current)
STEP 5: BULK (Charge with constant maximum current until battery voltage is reached to the threshold)
STEP 6: ABSORPTION (Provide gradually declining current charge for maximum battery voltage)
STEP 7: TRICKLE CHARGE (Finalize the charging process and bring the battery to maximum capacity)
STEP 8: MAINTENANCE (Continuously monitor the battery, and charging current will intelligently adapt to
the variable battery voltage)
NOTICE: After full charging cycle, use this battery to start matched vehicle's engine. If engine cannot be
activated (exclude the problem of vehicle itself), it indicates this battery has declined storage
capacity and need to be replaced.
2
3
4
5
6
7
HYBC-10
8
Advertisement
