Advertisement
04
3. ABOUT HYBC-10
1) The HYBC-10 is designed for charging all types of 12V lead-acid , including WET (Flooded), GEL, MF
(Maintenance-Free), EFB (Enhanced Flooded Battery), AGM (Absorbed Glass Mat) batteries.
2) Built-in intelligent microprocessor makes charging faster, easier and safer.
3) This charger has safety features, including spark proof, protection for reverse polarity, short circuit,
overcurrent, overcharge and overheat.
4) Auto-memory: after power on, the display window of charger will show the last selected mode (except
BOOST mode). The charger will enter charging mode in 5 seconds around.
5) When the CHARGE LED is on, it is on charging; when the CHARGE LED is off and FULL LED is on, the
charging is completed. But do NOT break the connection immediately. It will automatically switches from
full charge to maintenance status to maintain batteries during prolonged periods of storage.
6) It shows present voltage when VOLTAGE button is pressed.
7) Following is the charger's technical specification:
AC Input
DC Output
Efficiency
Power
Start Voltage
Charger Type
Battery Type
Battery Capacity
Boost Mode
Housing Protection
Ambient Temperature
AC 220~240V, 50/60Hz, 280W Max
DC 6V 2A/5A, DC 12V 2A/5A/10A, DC 12V 15A 300s(Boost)
8 steps, Full-automatic Charging Cycle
All Types of 6V and 12V Lead-acid Batteries
2-150Ah (6V), 2-300Ah (12V), Maintains All Battery Sizes
300s for 12V Lead-acid Batteries
85% Approx
280W Max
> 3V
IP20
0˚C ~ +40˚C
HYBC-10
Advertisement
