Download
Share
Print this page
Cequent PRO Series Manual
  1. Manuals
  2. Brands
  3. Cequent Manuals
  4. Bicycle Accessories
  5. PRO Series
  6. Manual

Cequent PRO Series Manual

Axis 3 bike carrier
Hide thumbs Also See for PRO Series:
1
2
3
4
5
6

Advertisement

Quick Links

Download this manual
Kit Contents:
Main Support Assembly
Upper Support Tube
Lower Support Tube
Upper / Lower Hook Straps
Cradle Strap
Rubber Pads
Assembly Instructions:
1.
Align mounting holes of upper support tube with holes in main support assembly. Use a supplied
¼ carriage bolt and ¼ Nylon locking nut to fasten upper support tube to main support.
DO NOT OVER TIGHTEN. Support tube must be able to rotate freely. (Fig. 1)
See Figure 2 to determine upper and lower support tube.
2.
Align mounting holes in upper support tube with adjustment slot in main support assemble.
Use a supplied ¼ carriage bolt and adjustment knob, to fasten tube to main support. (Fig. 1)
3.
Repeat steps 1 & 2 for lower support tube.
FIGURE 2
Cequent
49 Pacific Drive
Keysborough
VIC 3173
DESCRIPTION:
1
1
1
4
6
6
LOWER SUPPORT TUBE
(WIDE)
ITEM:
PRO2000
Axis 3 Bike Carrier
Side Cam Buckle Straps
Boot Hook
Adjustment Knobs
¼" x 1 ½" Carriage Bolt
¼" Lock Nut
UPPER SUPPORT TUBE
(NARROW)
2
2
4
8
4
Issue A
2/04/12
Page 1 of 6

Advertisement

loading

Related Manuals for Cequent PRO Series

Summary of Contents for Cequent PRO Series

  • Page 1 Use a supplied ¼ carriage bolt and adjustment knob, to fasten tube to main support. (Fig. 1) Repeat steps 1 & 2 for lower support tube. FIGURE 2 LOWER SUPPORT TUBE UPPER SUPPORT TUBE (WIDE) (NARROW) Issue A Cequent 2/04/12 49 Pacific Drive Keysborough Page 1 of 6 VIC 3173...
  • Page 2 Note: Take notice to the direction the tag end of the strap is passed through the cam buckles. FIGURE 3b FIGURE 3a CAM BUCKLE STRAP SIDE BRACKETS DIRECTION SIDE STRAPS TRUNK HOOK FIGURE 3c FIGURE 3d UPPER / LOWER HOOK STRAPS Issue A Cequent 2/04/12 49 Pacific Drive Keysborough Page 2 of 6 VIC 3173...
  • Page 3 Main support assembly arms should be at a slight angle upwards (10 -20 deg). Tighten adjustment knobs. (Fig. 4) Using rubber pads supplied, attatch to the inner surface of all hook straps. (Fig. 5) FIGURE 4 FIGURE 5 TRUNK HOOK RUBBER 10-20° Issue A Cequent 2/04/12 49 Pacific Drive Keysborough Page 3 of 6 VIC 3173...
  • Page 4 This will assist straps from coming loose when in transit. (Fig. 7a & 7b) Perform a manual push and pull test on the rack to ensure it is secure. FIGURE 6 FIGURE 7b FIGURE 7a TAG END Issue A Cequent 2/04/12 49 Pacific Drive Keysborough Page 4 of 6 VIC 3173...
  • Page 5 Ensure that the rear number plate of the vehicle is still visable. If it is not, it may have to be relocated to a visible location. FIGURE 8 CRADLE STRAP FIGURE 9 Issue A Cequent 2/04/12 49 Pacific Drive Keysborough Page 5 of 6 VIC 3173...

  • Page 6: Important Notes

    • After reading this manual, should you have any additional questions regarding the compatibility, fitting and/or use of this rack, please call your nearest ProSeries® authorized retail dealer or Cequent Technical Service. WARNING: •...

This manual is also suitable for:

Pro2000