Page 1
Use a supplied ¼ carriage bolt and adjustment knob, to fasten tube to main support. (Fig. 1) Repeat steps 1 & 2 for lower support tube. FIGURE 2 LOWER SUPPORT TUBE UPPER SUPPORT TUBE (WIDE) (NARROW) Issue A Cequent 2/04/12 49 Pacific Drive Keysborough Page 1 of 6 VIC 3173...
Page 2
Note: Take notice to the direction the tag end of the strap is passed through the cam buckles. FIGURE 3b FIGURE 3a CAM BUCKLE STRAP SIDE BRACKETS DIRECTION SIDE STRAPS TRUNK HOOK FIGURE 3c FIGURE 3d UPPER / LOWER HOOK STRAPS Issue A Cequent 2/04/12 49 Pacific Drive Keysborough Page 2 of 6 VIC 3173...
Page 3
Main support assembly arms should be at a slight angle upwards (10 -20 deg). Tighten adjustment knobs. (Fig. 4) Using rubber pads supplied, attatch to the inner surface of all hook straps. (Fig. 5) FIGURE 4 FIGURE 5 TRUNK HOOK RUBBER 10-20° Issue A Cequent 2/04/12 49 Pacific Drive Keysborough Page 3 of 6 VIC 3173...
Page 4
This will assist straps from coming loose when in transit. (Fig. 7a & 7b) Perform a manual push and pull test on the rack to ensure it is secure. FIGURE 6 FIGURE 7b FIGURE 7a TAG END Issue A Cequent 2/04/12 49 Pacific Drive Keysborough Page 4 of 6 VIC 3173...
Page 5
Ensure that the rear number plate of the vehicle is still visable. If it is not, it may have to be relocated to a visible location. FIGURE 8 CRADLE STRAP FIGURE 9 Issue A Cequent 2/04/12 49 Pacific Drive Keysborough Page 5 of 6 VIC 3173...
• After reading this manual, should you have any additional questions regarding the compatibility, fitting and/or use of this rack, please call your nearest ProSeries® authorized retail dealer or Cequent Technical Service. WARNING: •...