evertz 9000EDFA-D-AGC User Manual
  1. Manuals
  2. Brands
  3. evertz Manuals
  4. Amplifier
  5. 9000EDFA-D-AGC
  6. User manual

evertz 9000EDFA-D-AGC User Manual

Erbium doped fiber amplifiers
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
© Copyright 2016
EVERTZ MICROSYSTEMS LTD.
5292 John Lucas Drive
Burlington, Ontario
Canada L7L 5Z9
Phone:
+1 905-335-3700
Sales:
sales@evertz.com
Tech Support: service@evertz.com
Web Page:
http://www.evertz.com
Version 1.0, May 2016
The material contained in this manual consists of information that is the property of Evertz Microsystems and is intended solely for the use of
purchasers of the 9000EDFA series product. Evertz Microsystems expressly prohibits the use of this manual for any purpose other than the
operation of the 9000EDFA series product. Due to on going research and development, features and specifications in this manual are subject to
change without notice.
All rights reserved. No part of this publication may be reproduced without the express written permission of Evertz Microsystems Ltd. Copies of
this manual can be ordered from your Evertz dealer or from Evertz Microsystems.
9000EDFA-D-AGC
Erbium Doped Fiber Amplifiers
User Manual
Fax: +1 905-335-3573
Fax: +1 905-335-7571
Twitter:
@EvertzTV

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 9000EDFA-D-AGC and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for evertz 9000EDFA-D-AGC

Summary of Contents for evertz 9000EDFA-D-AGC

  • Page 1 Version 1.0, May 2016 The material contained in this manual consists of information that is the property of Evertz Microsystems and is intended solely for the use of purchasers of the 9000EDFA series product. Evertz Microsystems expressly prohibits the use of this manual for any purpose other than the operation of the 9000EDFA series product.
  • Page 2 This page left intentionally blank...
  • Page 3 IMPORTANT SAFETY INSTRUCTIONS The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “Dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (Servicing) instructions in the literature accompanying the product.
  • Page 4 WARNING Changes or Modifications not expressly approved by Evertz Microsystems Ltd. could void the user’s authority to operate the equipment. Use of unshielded plugs or cables may cause radiation interference. Properly shielded interface cables...

  • Page 5: Table Of Contents

    9000EDFA-D-AGC Erbium Doped Fiber Amplifiers TABLE OF CONTENTS INTRODUCTION ........................... 1 SPECIFICATIONS ......................... 3 OPERATION ..........................4 3.1. CONNECTION ........................4 3.2. TURN EDFA ON AND OFF ....................4 3.3. LED INDICATORS ........................ 4 3.4. LCD DISPLAY ........................5 ERROR AND MAINTENANCE ...................... 8 SAFETY PRECAUTIONS ......................
  • Page 6 High Erbium Doped Fiber Amplifiers FIGURES Figure 1-1: Optical & Electrical Schematic Drawing ..................1 Figure 1-2: 9000EDFA-D-AGC Front Panel ..................... 2 Figure 1-3: 9000EDFA-D-AGC Rear Panel...................... 2 Figure 2-1: 9000EDFA-D-AGC Specifications ....................3 Figure 6-1: DWDMEDFA Network Management System ................10 Figure 6-2: Parameter Set and Display ......................
  • Page 7 May 2016 Information contained in this manual is believed to be accurate and reliable. However, Evertz assumes no responsibility for the use thereof nor for the rights of third parties, which may be affected in any way by the use thereof. Any representations in this document concerning performance of Evertz products are for informational use only and are not warranties of future performance, either expressed or implied.
  • Page 8 9000EDFA-D-AGC High Erbium Doped Fiber Amplifiers This page left intentionally blank Page - iv Revision 1.0...

  • Page 9: Introduction

    High Erbium Doped Fiber Amplifiers INTRODUCTION 9000EDFA-D-AGC is an Erbium Doped Fiber Amplifier (EDFA) for 1529~1561nm Dense wavelength Division Multiplexing DWDM networks. It features low noise figures, high gain, adjustable gain, flattened gain, stable output power and fine environmental stability. It can realize the fiber optic communication for super span and extend relay distance.

  • Page 10: Figure 1-2: 9000Edfa-D-Agc Front Panel

    EDFA are shown by the LCD on the front panel. This information can also be accessed via RJ45 interface by an external computer. Figure 1-2 portrays the front panel of 9000EDFA-D-AGC EDFA. The key switch is to control the pump lasers; the switch button is to switch the LCD’s information.

  • Page 11: Specifications

    9000EDFA-D-AGC High Erbium Doped Fiber Amplifiers SPECIFICATIONS Figure 2-1: 9000EDFA-D-AGC Specifications Page - 3 Revision 1.0...

  • Page 12: Operation

    9000EDFA-D-AGC High Erbium Doped Fiber Amplifiers OPERATION 3.1. CONNECTION Connect the EDFA to the power supply when EDFA power switch and key lock are both off. Be sure that the input optical power is in the right range (-29dBm～+7dBm), and the optical interfaces of the linkers in use are in accordance with those of the EDFA.

  • Page 13: Lcd Display

    9000EDFA-D-AGC High Erbium Doped Fiber Amplifiers 3.4. LCD DISPLAY The LCD screen in the front panel is to display the detail information of the EDFA. Press the blue key to display these parameters circularly. The LCD screen in the front panel is to display the detail information of the EDFA. Press the blue key to display these parameters circularly.
  • Page 14 9000EDFA-D-AGC High Erbium Doped Fiber Amplifiers Bias and the upper limit of the pump1 for alarm Temperature of the pumps The upper and lower temperature limits of Pump1 for alarm Bias and the upper limit of the pump2 for alarm...
  • Page 15 9000EDFA-D-AGC High Erbium Doped Fiber Amplifiers IP address and netmask Page - 7 Revision 1.0...

  • Page 16: Error And Maintenance

    9000EDFA-D-AGC High Erbium Doped Fiber Amplifiers ERROR AND MAINTENANCE When EDFA is in its normal working state, the first five LEDs on the front panel will be green. If any of the LEDs show red, it indicates an abnormal working state of EDFA. In this case, please make sure...

  • Page 17: Safety Precautions

    9000EDFA-D-AGC High Erbium Doped Fiber Amplifiers SAFETY PRECAUTIONS Please contact Evertz if the problem cannot be solved by following the aforementioned methods. Do not attempt repair. Page - 9 Revision 1.0...

  • Page 18: Snmp Network Management User Guide

    9000EDFA-D-AGC High Erbium Doped Fiber Amplifiers SNMP NETWORK MANAGEMENT USER GUIDE DWDM EDFA Network Management System is based on SNMP protocol to meet the user’s requirement. The network management system can control and set the working station of the EDFA by PC, realize the function for the management and maintenance, and improve the service quality and satisfaction requirement.

  • Page 19: Figure 6-2: Parameter Set And Display

    9000EDFA-D-AGC High Erbium Doped Fiber Amplifiers Figure 6-2: Parameter Set and Display System Info sub menu is shown in figure 6-3. Clicking on the different system menu will change the displayed area screen. Figure 6-3: Instructions for System Info Sub Menu...

  • Page 20: Figure 6-4: Basic Information

    9000EDFA-D-AGC High Erbium Doped Fiber Amplifiers Figure 6-4: Basic Information Basic Info explanation: IP Address: Unique IP address designated to this device. Gateway: The IP address of the default gateway (router). Netmask: The subnet mask of the IP address specified above.

  • Page 21: Figure 6-5: Parameter Information

    9000EDFA-D-AGC High Erbium Doped Fiber Amplifiers Figure 6-5: Parameter Information Parameter Info explanation: Input Power: the input power of the optical signal. Input Power Alarm: the minimal input power. Output Signal Power: the output power of the signal. Output Power: the output power of the signal and the noise.

  • Page 22: Figure 6-6: Status Information

    9000EDFA-D-AGC High Erbium Doped Fiber Amplifiers Figure 6-6: Status Information Instruction of DWDM EDFA Status Info: Power: Show green when the power is on. Pump temperature: Show green when the pump temperature is less than 35 °C and higher than 15 °C.

  • Page 23: Figure 6-7: System Set

    9000EDFA-D-AGC High Erbium Doped Fiber Amplifiers System Set: Figure 6-7: System Set Instruction of System Set: Setup: set up the control mode, parameters and the status. Click [Setup] to view the mode and the LOS setting, shown in figure 6-8, and to change the working mode and status.

  • Page 24: Figure 6-9: Snmp Trap Address Setting & Community Name

    9000EDFA-D-AGC High Erbium Doped Fiber Amplifiers Figure 6-9: SNMP Trap Address Setting & Community Name SNMP Instruction of SNMP Info: SNMP: Click [SNMP] to view the SNMP setting. See Figure 6-9. SNMP Trap Address Setting: IP address of the trap host to which a trap is issued (three trap hosts are supported).

  • Page 25: Figure 6-10: Network & Other Setting

    9000EDFA-D-AGC High Erbium Doped Fiber Amplifiers Figure 6-10: Network & Other Setting Log out: Click [Log out] to exit, it is necessary to log in again with the name and the password. Page - 17 Revision 1.0...

  • Page 26: Faq

    If traps are not received check whether or not the address of the administrative station is trap address, and whether the IP address and community are correct. If the problem cannot be solved through above steps, please contact Evertz. Page - 18...

Table of Contents