PROFECO 77405 Instruction Manual page 25

Functioning
Connecting to the power supply
Warning! Always check that the switch is in the off position before
plugging in the power plug. Connect the plug to the power supply
protected by a residual current device.
Starting
On/Off switch (Fig.3)
Please note! Do not start the mower if it is standing in long grass.
Press the safety button (A) of the switch unit and then pull the
switch lever (B) against the bar. Hold the switch lever while
releasing the safety button. To stop the mower, release the switch
lever and it will automatically return to the off position.
Mowing (Fig.4)
We recommend that you use your mower as described in this
chapter to achieve optimum results and reduce the risk of cutting
the power cord.
 Place the largest part of the power cord closest to the starting
point.
 Switch on the mower as described above.
 Proceed as in Fig.4
 Move from position 1 to position 2
 Turn right and continue to position 3
 Turn left and go to position 4
 Repeat the above procedures if necessary.
Warning! Do not work in the direction of the cable.
4
4
2
3
1
3
25