Chapter 3 I Using Tv Features; Channel Banner; Autotuning - RCA L42FHD2X48 User Manual

3 Using TV Features

Autotuning

Go Back
Set DVD Channel
N/A
Exit
Set SAT-AUX Channel N/A
Sound
Picture
Channel List
Setup
Parental Control
Time
USB
Press < or > to select input for the DVD key.
Note : T his feature only
works with other RCA
devices.
28
Chapter 3 Using TV Features

Channel Banner

There are several indicators that may appear when you press the INFO button on the remote control. This
display is called the Channel Banner. The following list describes the items on the Channel Banner screen
(left to right and top to bottom).
TruSurroundXT This is sound mode. Go to page 34 for more information.
Stereo This is sound type. If the current channel is analog, "Stereo" appears when broadcasting
in stereo and "Mono" appears when the current channel is broadcasting in mono. If the
current channel is digital and the sound mode is off, this space is blank.
SAP If the current channel is analog, this shows it is broadcasting SAP (Second Audio
Program) information. If the current channel is digital, this area shows the language.
720 p 60 Broadcast signal resolution.
Unrated Rating information of the current program.
Parental Control The Parental Control state (locked or unlocked) of the current program.
D 10 CBS The "D" denotes a digital channel; an "A" denotes an analog channel. The channel, sub-
channel (if available for digital channels) and program (only for digital channels) are
displayed.
CC Closed Captioning is available on the current channel.
Cinerama Current screen format. If there are bars on the screen, you may be able to delete them by
pressing the FORMAT button on the remote. Go to page 33 for more information on
screen formats.
ZZZ 00:25 Current time left on sleep timer, if the sleep timer is set.
( ) 02:16 AM Current time.
Autotuning
T
Note: his feature only works with other RCA components.
The Autotuning feature automatically tunes the TV to the correct video input channel for the different
components connected to your TV. When you set up Autotuning in the menu system, you don't
have to remember to change your TV to the VID 1 input, for example, when you want to watch a
tape on the VCR. To set up the Autotuning feature, follow these steps:
1. Press the MENU button (the Main Menu appears).
2. Highlight Setup and press OK on your remote control.
3. Highlight Autotuning and press OK.