OPERATION 1.Insert TF card Card Slot supports up to 64GB TF card. A Class 10 TF card is required. - 4 -...
Page 5
2.Mounting the dash cam As shown below Suggested 2.1 Mount the dash cam on the inside surface of the windshield. The area near the rear-view mirror is suggested. 2.2 Connect the USB power cable dash cam and car charger, route the cable ed above.
Page 6
3.Connect the dash cam to a mobile device Settings--- WLAN--- Select “BOYO HD Dashcam”---Enter password “12345678”--- Join --- BOYO HD Dashcam APP --- Success. 4.Take a photo or a short video hand across the dash cam gesture area to take a photo.
, playback and download When the mobile device is connected to the , click it to preview the real-time video. Playback: Click the video icon in the BOYO HD Dashcam APP and select the videos you would like to view. 7.Update The dash cam has an OTA updating system, you will receive the latest firmware...
Page 8
10. Battery Protection Module (Optional) When dash cam enter 24H parking mode, the video will change to 1fps/sec to save SD card storage and battery power drain; If there are any external impact G-sensor 30fps/sec The function of is to detect low voltage .
Need help?
Do you have a question about the VTR 117GW and is the answer not in the manual?
Questions and answers