Display Messages - Casio EXILIM Exilim EX Z 2 User Manual

Display Messages

ALERT
Battery is low.
Card ERROR
Check
connections!
Files could not be
saved because
battery is low.
Folder cannot be
created.
Images are being
transferred.
Stop transfer and
turn off power?
LENS ERROR
Load paper!
Memory Full
Printing Error
Record Error
The camera's protection function may have activated
because camera temperature is too high. Turn off the camera
and wait until it cools down before trying to use it again.
Battery power is low.
There is something wrong with the memory card. Turn off the
camera, remove the memory card and then reload it into the
camera. If this message re-appears when you turn the
camera back on, format the memory card (page
IMPORTANT!
• Formatting a memory card deletes all its files. Before
formatting, try transferring recoverable files to a computer
or some other storage device.
You are attempting to connect the camera to a printer while
the camera's USB settings are not compatible with the USB
system of the printer (page
Battery power is low, so an image file could not be saved.
You are trying to record a file while there are already 9999
files stored in the 999th folder. If you want to record more,
delete files you no longer need (page 29).
You are attempting to turn off power while image data is being
transferred using the Eye-Fi card (page 103).
This message appears and the camera turns off whenever
lens performs some unexpected operation. If the same
message appears after you turn power back on, contact a
CASIO authorized service center or your original retailer.
The printer ran out of paper while printing.
Memory is full with images you recorded and/or files saved by
editing operations. Delete files you no longer need (page 29).
An error occurred while printing.
• The printer is turned off.
• The printer generated an error, etc.
Image compression could not be performed for some reason
during image data storage. Shoot the image again.
140
).
82
).
117
Appendix