Advertisement
Quick Links
Advertisement
Related Manuals for I2SE PLC-Stamp
Summary of Contents for I2SE PLC-Stamp
- Page 1 PLC-Stamp micro EVK Quickstart I2SE GmbH December 11, 2015...
- Page 2 Revisions Revision Release Date Changes December 10, 2015 updated section ”Contact”, changed document title, swapped connection order for Duckbill SPI, added note about Duckbill image Januar 14, 2014 changed connection order for the Evaluation Kit December 9, 2013 initial release...
-
Page 3: Table Of Contents
Contents Contents Contents 1 Introduction 2 Connect the bundle . . . 2.1 . . . for home automation systems ......2.2 . -
Page 4: Introduction
1 INTRODUCTION 1 Introduction With the Development bundle for PLC based Internet of Things you can develop your own PLC based home automation or electric vehicle charging system. The bundle consists of: • 2 PLC Stamp micro • 2 Evaluation kits (EVK) with PLC Stamp micro •... -
Page 5: Connect The Bundle
2 CONNECT THE BUNDLE . . . 2 Connect the bundle . . . 2.1 . . . for home automation systems Follow the following steps for both parts of the bundle. 1. Plug the SD Card into Duckbill SPI 2. - Page 6 2.1 . . . for home automation systems 2 CONNECT THE BUNDLE . . . 7. Connect Duckbill SPI with computer via USB extension cable...
-
Page 7: For Electric Vehicle Charging Systems
2.2 . . . for electric vehicle charging systems 2 CONNECT THE BUNDLE . . . 2.2 . . . for electric vehicle charging systems Follow the following steps for both parts of the bundle. 1. Plug the SD Card into Duckbill SPI 2. -
Page 8: Start The Bundle
Once the ethernet interfaces of both computers are configurated like you would do it in a normal LAN you should be able to communicate between them. Note: Always use the original Duckbill SPI SD card image and do not modify it. 4 Contact Website: http://www.i2se.com I2SE GmbH Friedrich-Ebert-Str. 61 04109 Leipzig Germany...